Analisis Pemeliharaan Mesin Blowmould dengan Metode RCM di PT. CCAI

Noor Ahmadi; Nur Yulianti Hidayah

doi:10.25077/josi.v16.n2.p167-176.2017

Noor Ahmadi

Universitas Pancasila

Nur Yulianti Hidayah

Universitas Pancasila

http://orcid.org/0000-0003-4022-4538

Keywords

Abstract

PT. Coca-Cola Amatil Indonesia is a company that produces carbonated beverages. Most of the production activity uses automatic machines. The problem faced is the damage that often occurs suddenly on the blowmould machine so that corrective maintenance must be done. The purpose of this research is to know the cause of the damage and to propose the action plan to minimize downtime. The method used is Reliability Centered Maintenance to determine the selection of action and time interval of replacement for critical components on the blowmould machine. From the FMEA analysis, it is known that the critical components of each blowmould machine subsystem are bearing roller feed, mandrel, seal gasket, and fitting. The results of LTA analysis are the category of failure (outage problem and economic problem) and the selection of action for the critical component (time directed). From the calculation of Total Minimum Downtime, known that the replacement schedule for critical component are 23 days for bearing roller feed, 9 days for mandrel, 8 days for seal gasket, and 8 days for fitting, that is resulting in decreased downtime of 1.56% with a value of 99.63% availability.

Downloads

Download data is not yet available.

References

[1] V. Gasperz. Total Quality Management. Jakarta: PT. Gramedia Pustaka Utama, 2004.

[2] J. Heizer dan B. Render. Operation Management, 6^th Edition. Prentice Hall, 2001.

[3] S. Assauri. Manajemen Produksi dan Operasi. Depok: FEUI, 2004.

[4] J. Moubray. Reliability Centered Maintenance II, Second Edition. New York: Industria Press Inc., 2000.

[5] A.M. Smith dan G.R. Hinchcliffe. RCM Gateway to World Class Maintenance. USA: Elsevier. Inc., 2004.

[6] V.S. Dephande dan J.P. Modak. Application of RCM to Medium Scale Industry. India: Department of Mechanical Engineering, P.C.E & A, Nagpur University, Maharashanta, 2001.

[7] M.T. Azis, M.S. Suprawhardana, dan T.P. Purwanto. “Penerapan Metode Reliability Centered Maintenance (RCM) Berbasis Web Pada Sistem Pendingin Primer Di Reaktor Serba Guna Ga. Siwabessy”. Jurnal Forum Nuklir, Vol. 4(1), pp. 81-98, Mei 2010.

[8] N.B. Puspitasari dan A. Murtanto. “Penggunaan FMEA Dalam Mengidentifikasi resiko Kegagalan Proses Produksi Sarung ATM (Alat tenun Mesin) Studi Kasus PT. Asaputex jaya Tegal”. Jurnal J@TI Undip, Vol. 9(2), pp. 93-98, Mei 2014, https://doi.org/10.12777/jati.9.2.93-98.

[9] D.H. Stamatis. Failure Mode and Effect Analysis: FMEA from Theory to Execution. Milwaukee: ASQC Quality Press, 1995.

[10] Taufik dan S. Septyani. “Penentuan Interval Waktu Perawatan Komponen Kritis Pada Mesin Turbin Di PT. PLN (Persero) Sektor Pembangkit Ombilin”. Jurnal Optimasi Sistem Industri, Vol. 14(2), pp. 238-258, Oktober 2015, https://doi.org/10.25077/josi.v14.n2.p238-258.2015.

[11] N. Ansori dan I. Mustajib. Sistem Perawatan Terpadu. Yogyakarta: Graha ilmu, 2013.

PDF

Published

Oct 8, 2017

https://doi.org/10.25077/josi.v16.n2.p167-176.2017

How to Cite

[1]

N. Ahmadi and N. Y. Hidayah, “Analisis Pemeliharaan Mesin Blowmould dengan Metode RCM di PT. CCAI”, J. Optimasi Sist. Ind., vol. 16, no. 2, pp. 167–176, Oct. 2017.

Issue

Vol. 16 No. 2 (2017): Published in October 2017

Section

Articles

Authors' Retention of Copyright

Authors retain the copyright of their original work published in Jurnal Optimasi Sistem Industri (JOSI). By submitting their manuscript to the journal, authors grant Jurnal Optimasi Sistem Industri (JOSI) a non-exclusive license to publish the work under the CC BY-NC-SA 4.0 International License. This means that others are permitted to:

Share and adapt the work for non-commercial purposes, provided proper attribution is given to the original authors and source.
Create derivative works based on the original article, as long as the new work is non-commercial and under the same CC BY-NC-SA 4.0 International License.

Non-Commercial Usage

The CC BY-NC-SA 4.0 International License restricts commercial use of the published work and its derivatives. Commercial use includes generating revenue, financial gain, or any form of commercial exploitation. This limitation aims to preserve the scholarly and educational nature of the content.

ShareAlike Requirement

If you remix, adapt, or build upon the work, you must distribute your contributions under the same CC BY-NC-SA 4.0 International License as the original work. This "ShareAlike" requirement ensures that any new works based on the original content adhere to the same non-commercial, share-alike principles.

Usage, Attribution, and Citations

Authors and readers are allowed to:

Share and distribute the published article in any medium or format.
Adapt, remix, transform, and build upon the article for non-commercial purposes.
Provide appropriate attribution to the original authors and the journal.

When using content from Jurnal Optimasi Sistem Industri (JOSI), proper attribution must be provided through citation of the original source and authors.

Copyright Infringement and Ethical Considerations

If you believe that any material published in Jurnal Optimasi Sistem Industri (JOSI) infringes upon your copyright or the copyright of someone you represent, please contact the editorial team promptly. The journal is committed to addressing copyright concerns in accordance with established ethical guidelines set forth by the Committee on Publication Ethics (COPE).

For any questions or inquiries related to copyright and licensing, please contact the editorial team at editor_josi[at]eng.unand.ac.id.