Sistem Pengukuran Kinerja Supply Chain Management Pada Proyek Konstruksi

Demi Ramadian; Elita Amrina

doi:10.25077/josi.v18.n1.p75-85.2019

Demi Ramadian

Universitas Andalas

Elita Amrina

Universitas Andalas

Keywords

Abstract

Construction project implementation process is often found inefficiency and problems at every stage of the construction process. Inefficiencies are caused because construction projects have high levels of fragmentation. The high level of fragmentation cannot be separated from the complexity and many work items on construction projects. To reduce the problem of inefficiencies in the implementation of construction projects required good supply chain management or better known as supply chain management (SCM) on construction projects. Therefore it is necessary to study the management of SCM in the construction project to reduce the inefficiency that occurred. SCM management of construction projects is done by designing SCM performance measurement systems in construction projects. This performance measurement system produces indicators that are combined with the Supply Chain Operation Reference (SCOR) method. So it helps in performing SCM performance measurement on construction projects. From the design results, obtained 14 SCM performance indicators on construction projects. The performance indicators are then used to perform SCM performance measurement of cement plant construction projects. From the measurement results obtained SCM performance value of 41 from a scale of 100. This shows the performance of SCM on construction projects for the construction of the cement plant is at a marginal level.

Downloads

Download data is not yet available.

References

[1] Jurnal Ibukota. (2017). Sektor Konstruksi Tempati Posisi Ketiga Penyokong Pertumbuhan Ekonomi Indonesia 2016. 07 februari2017.https://jurnalibukota.wordpress.com/2017/02/10/sektor-konstruksi-tempati-posisi-ketiga-penyokong-pertumbuhan-ekonomi-indonesia-2016/. Diakses 13 April 2017.

[2] Haridez.,Pangeran. (2012). Identifikasi Tingkat Kematangan Penerapan Supply Chain Konstruksi Pada PT X. Skripsi. Universitas Indonesia. Depok

[3] Aditya,Kadek. (2017). Analisis Risiko Dalam Aliran Supply Chain Pada Proyek Konstruksi Gedung Di Bali. Jurnal Spektran, Vol5, No. 1, hal 1-87. https://doi.org/10.24843/SPEKTRAN.2017.v05.i01.p05.

[4] Soepiadhy,Sutoyo. (2011). Pengaruh Rantai Pasok Terhadap Kinerja Kontraktor Bangunan Gedung di Jember. Prosiding Seminar Nasional Aplikasi Teknologi Prasarana Wilayah

[5] Maddeppungeng, Andi. (2013). Analisis Kinerja Supply Chain Pada Proyek Konstruksi Bangunan Gedung.

[6] Maghrizal, Aris. (2014). Analisis Pola dan Kinerja Supply Chain Pada Proyek Konstruksi Bangunan Perumahan. Jurnal Konstruksia, Vol. 5 no. 2

[7] Wibowo, Agung. (2015). The Analysis of Supply Chain Performance Measurement at Construction Project. Procedia Engineering 125 (25-31). https://doi.org/10.1016/j.proeng.2015.11.005.

[8] Wirahadikusumah, R.D. (2008). Pengembangan Indikator Kinerja Supply Chain Pada Proyek Konstruksi Bangunan Gedung. JurnalTeknologi, Edisi no.3, Tahun XXII

[9] Supply Chain Council, Supply Chain Operation Reference- Model, Revision 11.0

[10] Irvan, Muhammad. (2011). Implementasi Sistem Penilaian Kinerja Supply Chain Pada Perusahaan Stamping. Skripsi. Universitas Indonesia. Depok

PDF

Published

May 16, 2019

https://doi.org/10.25077/josi.v18.n1.p75-85.2019

How to Cite

[1]

D. Ramadian and E. Amrina, “Sistem Pengukuran Kinerja Supply Chain Management Pada Proyek Konstruksi”, J. Optimasi Sist. Ind., vol. 18, no. 1, pp. 75–85, May 2019.

Issue

Vol. 18 No. 1 (2019): Published in May 2019

Section

Articles

Authors' Retention of Copyright

Authors retain the copyright of their original work published in Jurnal Optimasi Sistem Industri (JOSI). By submitting their manuscript to the journal, authors grant Jurnal Optimasi Sistem Industri (JOSI) a non-exclusive license to publish the work under the CC BY-NC-SA 4.0 International License. This means that others are permitted to:

Share and adapt the work for non-commercial purposes, provided proper attribution is given to the original authors and source.
Create derivative works based on the original article, as long as the new work is non-commercial and under the same CC BY-NC-SA 4.0 International License.

Non-Commercial Usage

The CC BY-NC-SA 4.0 International License restricts commercial use of the published work and its derivatives. Commercial use includes generating revenue, financial gain, or any form of commercial exploitation. This limitation aims to preserve the scholarly and educational nature of the content.

ShareAlike Requirement

If you remix, adapt, or build upon the work, you must distribute your contributions under the same CC BY-NC-SA 4.0 International License as the original work. This "ShareAlike" requirement ensures that any new works based on the original content adhere to the same non-commercial, share-alike principles.

Usage, Attribution, and Citations

Authors and readers are allowed to:

Share and distribute the published article in any medium or format.
Adapt, remix, transform, and build upon the article for non-commercial purposes.
Provide appropriate attribution to the original authors and the journal.

When using content from Jurnal Optimasi Sistem Industri (JOSI), proper attribution must be provided through citation of the original source and authors.

Copyright Infringement and Ethical Considerations

If you believe that any material published in Jurnal Optimasi Sistem Industri (JOSI) infringes upon your copyright or the copyright of someone you represent, please contact the editorial team promptly. The journal is committed to addressing copyright concerns in accordance with established ethical guidelines set forth by the Committee on Publication Ethics (COPE).

For any questions or inquiries related to copyright and licensing, please contact the editorial team at editor_josi[at]eng.unand.ac.id.