Implementasi Metode QCC untuk Menurunkan Jumlah Sisa Sampel Pengujian Compound

  Author(s)
Khamaludin Khamaludin    (Universitas Islam Syekh Yusuf - Indonesia) Orcid ID
Anang Pandan Respati (PT. Bando Indonesia - Indonesia)

 ) Corresponding Author
Copyright (c) 2019 khamaludin khamaludin
  Abstract

In the manufacturing industry, the role of quality control or laboratory parts is very important to ensure the quality of raw materials or finished products by testing. Smooth testing carried out by the QC/Lab section will have an impact on the smooth production process. PT. Bando Indonesia is one of the automotive manufacturing industries that is consistent with quality. However, based on April-June 2018 data based on SQCDMP data, it was found that productivity factors were quite low as indicated by the presence of remaining hardness and specific gravity compound test results reaching 36.44% at the end of each shift. By carrying out corrective actions through the 8 step Quality Control Circle (QCC) and using seven tools as an analytical tool, the results obtained are significant, namely the reduction in the remaining samples of compound testing by only 21.97% and impact on cost, morality, and productivity.

  Keywords
Eight step; manufaktur; produktivitas; QCC; seven tools
  Click to Read the Full Text
PDF
  References

[1] S. Riadi and Haryadi, “Pengendalian Jumlah Cacat Produk pada Proses Cutting dengan Metode Quality Control Circle (QCC) pada PT. Toyota Boshoku Indonesia (TBINA),” J. Ind. Manuf., vol. 4, no. 1, pp. 27–36, 2019.

[2] D. C. Montgomery, Pengantar Pengendalian Kualitas Statistik. Yogyakarta: Gajah Mada University Press, 1993.

[3] W. W. Dharsono, “Penerapan Quality Control Circle pada Proses Produksi Wafer Guna Mengurangi Cacat Produksi (Studi Kasus di PT XYZ Jakarta),” J. Fateksa, vol. 2, no. 1, pp. 31–39, 2017.

[4] J. F. Yonatan and H. C. Palit, “Upaya Prningkatan Kualitas Part Upper Cover dengan Metode PDCA di PT Astra Komponen Indonesia,” J. Titra, vol. 3, no. 2, pp. 283–288, 2015.

[5] T. Nova, K. Siregar, and I. Aulia, “Analisis Pengendalian Kualitas pada Proses Perebusan dengan Menerapkan QCC (Quality Control Circle) di PT.XYZ,” e-Jurnal Tek. Ind. FT USU, vol. 3, no. 1, pp. 41–46, 2013.

[6] Vincent Gaspersz, Lean Six Sima for Manufacturing and Service Industries. Bogor: Vinchiristo Publication, 2011.

[7] T. Dahniar, “Analisa Movement Fuel Menggunakan Quality Control Circle (QCC) untuk Mengurang NG No Conection di PT . INS,” Teknologi, vol. 1, no. 1, pp. 35–42, 2018.

[8] S. Imat and A. Hilmi, “Analisis Identifikasi Pengendalian Kualitas Produk Rubber Ring di CV. Mandala Logam,” Kalibrasi, vol. 14, no. 1, pp. 35–45, 2016.

[9] M. Firmansyah, A. Lomi, and D. Gustopo, “Meningkatkan Mutu Kain Tenun Ikat Tradisional di Desa / Kelurahan Roworena Secara Berkesinambungan di Kabupaten Ende dengan Pendekatan Metode TQM,” J. Teknol. dan Manaj. Ind., vol. 3, no. 1, pp. 5–13, 2017.

[10] O. Andre Wahyu Riyanto, “Implementasi Metode Quality Control Circle untuk Menurunkan Tingkat Cacat pada Produk Alloy Wheel,” J. Eng. Manag. Industial Syst., vol. 3, no. 2, pp. 104–110, 2017. https://doi.org/10.21776/ub.jemis.2015.003.02.7.

[11] Sulaeman, “Analisa Pengendalian Kualitas untuk Mengurangi Produk Cacat Speedometer Mobil dengan Menggunakan Metode QCC di PT. INS,” J. PASTI, vol. VIII, no. 1, pp. 71–95, 2014.

[12] T. W. S. Panjaitan, D. A. Y. A., and M. Yessicha, “Minimalisasi Kekurangan Material Melalui Implementasi Quality Control Circle,” J. Tek. Ind., vol. 13, no. 2, pp. 101–106, 2013. https://doi.org/10.9744/jti.13.2.101-106.

[13] M. E. Beatrix and N. E. Triana, “Improvement Bonding Quality of Shoe Using Quality Control Circle,” Sinergi, vol. 23, no. 2, pp. 123–131, 2019. https://doi.org/10.22441/sinergi.2019.2.005.

[14] Jonny, “Upaya Penurunan Kejadian Kehilangan Gelas Berukuran Sedang Melalui Penerapan Metode Quality Control Circle (QCC) di Unit Gizi, RS ABC, Jakarta.,” Comtech, vol. 3, no. 1, pp. 533–542, 2012. https://doi.org/10.21512/comtech.v3i1.2452.

[15] L. R. Wang, Y. Wang, Y. Lou, Y. Li, and X. G. Zhang, “The Role of Quality Control Circles in Sustained Improvement of Medical Quality,” Springerplus, vol. 2, no. 1, pp. 1–5, 2013. https://doi.org/10.1186/2193-1801-2-141.

[16] M. F. Hafid and A. M. S. Yusuf, “Analisis Penerapan Quality Control Circle untuk Meminimalkan Binning Loss pada Bagian Receiving PT. Hadji Kalla Toyota Depo Part Logistik Makasar,” JIEM, vol. 3, no. 2, pp. 1–7, 2018. https://doi.org/10.33536/jiem.v3i2.228.

[17] A. Y. Nasution, S. Yulianto, and N. Ikhsan, “Implementasi Metode Quality Control Circle untuk Peningkatan Kapasitas Produksi Propeller Shaft di PT XYZ,” J. Mesin Teknol., vol. 12, no. 1, pp. 33–39, 2018.

[18] R. Astini, “Menanggulangi Kelebihan Pemakaian Coklat Pada Produksi Wafer XX Dengan Metode QCC Di Pt.XYZ,” J. Pasti, vol. VIII, no. 3, pp. 326–339, 2014.

[19] N. Bachtiar, C. I. Parwati, J. Susetyo, and J. T. Industri, “Penerapan Quality Control Circle pada Proses Finishing dan Assy Part Duct Air Intake Guna Meminimasi Biaya Produksi,” Rekavasi, vol. 1, no. 1, pp. 38–44, 2013.

StatisticsArticle Metrics

This article has been read : 39 times
PDF file viewed/downloaded : 30 times

This article can be traced from





Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.