Analisis Perawatan Mesin dengan Pendekatan RCM dan MVSM

Dwi Agustina Kurniawati; Muhammad Lutfan Muzaki

doi:10.25077/josi.v16.n2.p89-105.2017

Dwi Agustina Kurniawati

UIN Sunan Kalijaga Yogyakarta

http://orcid.org/0000-0003-3279-0775

Muhammad Lutfan Muzaki

UIN Sunan Kalijaga Yogyakarta

Keywords

Abstract

Maintenance system at UMKM ED Aluminum Yogyakarta is using preventive and corrective maintenance program, but the implementation of this program still have many problems. The problem occurs because there is no maintenance system program and the company doesn’t have Standard Operational Procedure (SOP) in maintenance to overcome machine failures resulted in the increase of the downtime value. To cope the problems, in this paper we used application of SOP and appropriate task maintenance selection using Maintenance Value Stream Map (MVSM) method supported by Reliability Centered Maintenance (RCM). Beside task selected among all products that have been produced, there is one machine that gives the biggest profit to the company. The product is feet infusion. Kondia milling machine is one of machines produces the feet infusion that has the longest downtime which was 17,75 hour during January 2016 until October 2016. RCM consist of Failure Mode Effect Analysis (FMEA), Pareto diagram, decision worksheet RCM, whereas the MVSM describes the maintenance activity. Based on Pareto analysis, the critical components on the Kondia milling machine were the magnetic contactor, relay, fuse, cutter, dynamo and bearing. The result of RCM decision worksheet proposed the appropriate action for the critical components cares. The Standard Operational Procedure (SOP) for the maintenance system on the operation of Kondia milling machine are suggested to the company for getting more significant outcome.

Downloads

Download data is not yet available.

References

[1] R. Lukodono, Pratikno, dan R. Soenoko. Analisis Penerapan Metode RCM dan MVSM untuk Meningkatkan Keandalan Pada Sistem Maintenance (Studi Kasus PG. X). Jurnal Rekayasa Mesin, Volume IV, pp. 43-52, 2013.

[2] J. Moubray. Reliability Centered Maintenance. 2nd penyunt. New York: Industrial Press Inc. 1997.

[3] V. Gaspersz. Total Quality Management. Jakarta: Gramedia Pustaka Utama. 2002.

[4] T. Osada. Sikap Kerja 5 S. Jakarta: Penerbit PPM. 2004.

[5] M. Effendi dan M. Arifin. Perbedaan Risk Priority Number dalam Failure Mode and Effects Analysis FMEA Sistem Alat Berat Heavy Duty Truck HD 785-7. Spektrum Industri. Volume XIII, pp. 103-114. 2015.

[6] S. Kannan, Y. Li, N. Ahmed dan Z. El-Akkad. Developing Maintenance Value Stream Map. Departement of Industrial and Information Engineering, pp. 1-8. 2007.

[7] D.P. Sari dan M. F. Ridho. Evaluasi Manajemen Perawatan Dengan Metode Reliability Centered Maintenance (RCM) II Pada Mesin Blowing di Plant PT. Pisma Putra Textile. Jurnal Teknik Industri Universitas Diponegoro, XI (2), pp. 73-80. 2016.

PDF

Published

Oct 8, 2017

https://doi.org/10.25077/josi.v16.n2.p89-105.2017

How to Cite

[1]

D. A. Kurniawati and M. L. Muzaki, “Analisis Perawatan Mesin dengan Pendekatan RCM dan MVSM”, J. Optimasi Sist. Ind., vol. 16, no. 2, pp. 89–105, Oct. 2017.

Issue

Vol. 16 No. 2 (2017): Published in October 2017

Section

Articles

Authors' Retention of Copyright

Authors retain the copyright of their original work published in Jurnal Optimasi Sistem Industri (JOSI). By submitting their manuscript to the journal, authors grant Jurnal Optimasi Sistem Industri (JOSI) a non-exclusive license to publish the work under the CC BY-NC-SA 4.0 International License. This means that others are permitted to:

Share and adapt the work for non-commercial purposes, provided proper attribution is given to the original authors and source.
Create derivative works based on the original article, as long as the new work is non-commercial and under the same CC BY-NC-SA 4.0 International License.

Non-Commercial Usage

The CC BY-NC-SA 4.0 International License restricts commercial use of the published work and its derivatives. Commercial use includes generating revenue, financial gain, or any form of commercial exploitation. This limitation aims to preserve the scholarly and educational nature of the content.

ShareAlike Requirement

If you remix, adapt, or build upon the work, you must distribute your contributions under the same CC BY-NC-SA 4.0 International License as the original work. This "ShareAlike" requirement ensures that any new works based on the original content adhere to the same non-commercial, share-alike principles.

Usage, Attribution, and Citations

Authors and readers are allowed to:

Share and distribute the published article in any medium or format.
Adapt, remix, transform, and build upon the article for non-commercial purposes.
Provide appropriate attribution to the original authors and the journal.

When using content from Jurnal Optimasi Sistem Industri (JOSI), proper attribution must be provided through citation of the original source and authors.

Copyright Infringement and Ethical Considerations

If you believe that any material published in Jurnal Optimasi Sistem Industri (JOSI) infringes upon your copyright or the copyright of someone you represent, please contact the editorial team promptly. The journal is committed to addressing copyright concerns in accordance with established ethical guidelines set forth by the Committee on Publication Ethics (COPE).

For any questions or inquiries related to copyright and licensing, please contact the editorial team at editor_josi[at]eng.unand.ac.id.