Sistem Peringatan Dini untuk Mendeteksi Lifetime Sparepart pada Mesin TR OSAWA

  Author(s)
Adi Nugroho (Universitas Putera Batam)
Yahri Nastangin (PT. Nissin Kogyo Batam)
  Abstract

Maintenance is a very important activitiy to keep an equipment always at its best condition. This research aims to create an early warning system/ lifetime spare parts detector of Nissin Kogyo Batam (NKB) Company’s TR Osawa machine by adopting PLC (Programmable Logic Controller). PLC is used to automatically calculate the lifetime spare parts of TR Osawa machine. PLC will shut down the machine if it detects that lifetime spare parts have reached the specified setting standard (380-400 k pcs). As a result, PLC machine can provide more accurate results than manual counting.

  Keywords
Sistem peringatan dini; lifetime spare part; detektor; PLC
  Click to Read the Full Text
PDF
  References

[1] D.S. Dhillon. “Preventive Maintenance” Engineering maintenance: a modern approach. New York: CRC Press LLC, 2002, pp. 55-88. https://doi.org/10.1201/9781420031843.ch4

[2] L. Lee Ho dan R.C. Quinino. “An attribute control chart for monitoring the variability of a process”. International Journal of Production Economics, Vol. 145, pp. 263-267, 2013, https://doi.org/10.1016/j.ijpe.2013.04.046.

[3] A. Alrabghi dan A. Tiwari. “State of the art in simulation-based optimisation for maintenance systems”. Computers and Industrial Engineering”, Vol 82, pp. 167–182, 2015, https://doi.org/10.1016/j.cie.2014.12.022.

[4] R.S. Mulyono. “Perancangan Sitem Peringatan Dini Untuk Mendeteksi Perawatan Mesin Di Industri Semen.” J. Politeknologi, Vol. 10(3), pp. 245, 2011, http://jurnalpnj.com/index.php/politeknologi/article/view/63.

[5] R. Melladya, P.B. Santoso, dan M. Choiri. “Perancangan Sistem Informasi Manajemen Perawatan Mesin Berbasis Group Technology.” Jurnal Rekayasa dan Manajemen Sistem Industri, Vol. 2(3), pp. 613-623, 2014, http://jrmsi.studentjournal.ub.ac.id/index.php/jrmsi/article/view/112.

[6] A. Susilo dan W.D. Aji. “Purwarupa Alat Pemilah Barang Berdasarkan Dimensi Berbasis PLC Omron Sysmac CPM 1.” J.Telkomnika, Vol. 5(2), pp.1, 2007, https://doi.org/10.12928/telkomnika.v5i2.1345

[7] Sutarman. Pengantar Teknologi Informasi. Jakarta: Bumi Akasara, 2012, pp. 15-31.

[8] J.H. Mustakini. Sistem Teknologi Informasi. Yogyakarta: Andi Offset, 2009.

[9] O.H. AP, T.U. Kalsum, dan Hermansyah. “Pembuatan Alat Pendeteksi Arah Mata Angin Menggunakan Sensor Rotari Berbasis Mikrokontroller Atmega 16.” J. Media informasi, Vol. 10(1), pp. 42, 2014, http://jurnal.unived.ac.id/index.php/jmi/issue/view/23.

[10] Taufik dan W. Putri. ”Perancangan Prototype Early Warning System Kontrol On/Off Belt Conveyor Menggunakan PLC Siemens S7-300.” J. Optimasi Sistem Industri. Vol. 14(1), pp. 116, 2015, doi: https://doi.org/10.25077/josi.v14.n1.p116-137.2015.

[11] M.P. Groover. Otomasi Sistem Produksi dan Computer-Integrated Manufacturing. (Ed.2. Jilid 1). Surabaya: Guna Widya Kertajaya, 2005, pp. 22-41.

StatisticsArticle Metrics

This article has been read : 96 times
PDF file viewed/downloaded : 39 times