Indikator Proses Utama pada Proses Grinding dengan Pendekatan Manajemen Pengetahuan

Ikhwan Arief; Alfajri Nalda

doi:10.25077/josi.v13.n2.p743-759.2014

Ikhwan Arief

Jurusan Teknik Industri, Fakultas Teknik, Universitas Andalas, Padang

http://orcid.org/0000-0002-1958-0282

Alfajri Nalda

Jurusan Teknik Industri, Fakultas Teknik, Universitas Andalas, Padang

Keywords

Manajemen Pengetahuan, Grinding, IDEF0

Abstract

This study discusses about key process indicators in grinding with the knowledge management approach. Common/key indicators used in the machine are workpiece, grinding wheel, dressing tool and coolant. The resulting key processeswill benefit firms and their operators especially new ones in managing scienceson grinding process that will allow knowledge transferred to new operators quickly. Process indicators are described with IDEF0 diagrams which will define the inputs, outputs, mechanisms and controls.
Keywords: Knowledge Management, Grinding, IDEF0
Abstrak
Penelitian ini membahas tentang indikator proses utama pada proses grinding/gerinda dengan pendekatan manajemen pengetahuan. Indikator umum yang dipakai yaitu mesin, benda kerja, grinding wheel, dressing tool dan coolant. Hasil ini akan bermanfaat untuk membantu perusahaan dalam mengelola ilmu pengetahuan pada proses grinding sehingga akan memudahkan pewarisan ilmu pengetahuan kepada operator baru dari operator senior. Indikator proses digambarkan dengan IDEF0 yang memperlihatkan masukan, luaran, mekanisme dan kontrol pada proses.
Kata kunci: Manajemen Pengetahuan, Grinding, IDEF0

Downloads

Download data is not yet available.

References

[1] Christianti, Meliana, 2013. Pemodelan Proses Bisnis Menggunakan IDEF0 dengan Studi Kasus Bank X.. Bandung.

[2] Grovver, Mikell P. 2007 . Fundamental of modern Manufacturing. Inggris : John Wiley & Sons Ltd.

[3] Kementrian Perindustrian Indonesia. 2014. Permintaan Eksport Hasil Industri. Diakses pada 4 Februari 2014, dari http://www.kemenperin.go.id

[4] Klocke, Fritz. 2009. Manufacturing Processes 2 , Grinding, Honing, Lapping. Springer-Verlag Berlin Heidelberg.

[5] Marinescu, Loan D. 2007. Handbook of Machining with Grinding wheel. United States of America: Taylor & Francis Group.

[6] Purnama, ,Miranti, 2009. Peran Budaya Pembelajaran dan Knowledge Management terhadap Kinerja Perusahaan Studi Kasus : PT XYZ. Jawa Barat

[7] Turban, Efraim.(2006). Information Technology for Management, 5th Ed, Asia: John Wiley and Son.

[8] Turban, Efraim. (2006). Pengantar Teknologi Informasi.(Ed. 3). Jakarta: Salemba Infotek.

[9] Marinov, Valery. Abrasive and non-traditional Processes. me.emu.edu.tr/ME364_casting_processes.pdf. Diakses pada tanggal 24 Februari 2014

[10] http://www.yellowpages.com.au/sa/albert-park/k-g-f-precision-grinding-12588143-listing.html. Diakses pada tanggal 26 November 2013

[11] http://www.trainingandtestingservices.co.uk/abrasive-wheel-training/abrasive-wheel-operator/. Diakses pada tanggal 25 Maret 2014

[12] http://www.sterlingabrasives.com/images/download/1, 20014). Diakses pada tanggal 24 Februari 2014

PDF

Published

Apr 22, 2016

https://doi.org/10.25077/josi.v13.n2.p743-759.2014

How to Cite

[1]

I. Arief and A. Nalda, “Indikator Proses Utama pada Proses Grinding dengan Pendekatan Manajemen Pengetahuan”, J. Optimasi Sist. Ind., vol. 13, no. 2, pp. 743–759, Apr. 2016.

Issue

Vol. 13 No. 2 (2014): Published in 1st October 2014

Section

Articles

Authors' Retention of Copyright

Authors retain the copyright of their original work published in Jurnal Optimasi Sistem Industri (JOSI). By submitting their manuscript to the journal, authors grant Jurnal Optimasi Sistem Industri (JOSI) a non-exclusive license to publish the work under the CC BY-NC-SA 4.0 International License. This means that others are permitted to:

Share and adapt the work for non-commercial purposes, provided proper attribution is given to the original authors and source.
Create derivative works based on the original article, as long as the new work is non-commercial and under the same CC BY-NC-SA 4.0 International License.

Non-Commercial Usage

The CC BY-NC-SA 4.0 International License restricts commercial use of the published work and its derivatives. Commercial use includes generating revenue, financial gain, or any form of commercial exploitation. This limitation aims to preserve the scholarly and educational nature of the content.

ShareAlike Requirement

If you remix, adapt, or build upon the work, you must distribute your contributions under the same CC BY-NC-SA 4.0 International License as the original work. This "ShareAlike" requirement ensures that any new works based on the original content adhere to the same non-commercial, share-alike principles.

Usage, Attribution, and Citations

Authors and readers are allowed to:

Share and distribute the published article in any medium or format.
Adapt, remix, transform, and build upon the article for non-commercial purposes.
Provide appropriate attribution to the original authors and the journal.

When using content from Jurnal Optimasi Sistem Industri (JOSI), proper attribution must be provided through citation of the original source and authors.

Copyright Infringement and Ethical Considerations

If you believe that any material published in Jurnal Optimasi Sistem Industri (JOSI) infringes upon your copyright or the copyright of someone you represent, please contact the editorial team promptly. The journal is committed to addressing copyright concerns in accordance with established ethical guidelines set forth by the Committee on Publication Ethics (COPE).

For any questions or inquiries related to copyright and licensing, please contact the editorial team at editor_josi[at]eng.unand.ac.id.