Model Penilaian Pemasok Bahan Olah Karet (Bokar)

  Author(s)
Ridha Luthvina    (Politeknik ATI Padang - Indonesia)
Rika Ampuh Hadiguna (Universitas Andalas - Indonesia)
Jonrinaldi Jonrinaldi (Universitas Andalas - Indonesia)

 ) Corresponding Author
Copyright (c) 2019 Ridha Luthvina, Rika Ampuh Hadiguna, Jonrinaldi
  Abstract
Crumb rubber industry only depends on one main raw material that is called Bahan Olah Karet (Bokar). Based on the observation of several crumb rubber factories in West Sumatera, the company still uses an unsystematic way of choosing the suppliers of bokar. The weakening of the supplier’s supervision system causes bokar that received by the company, in terms of quality and quantity are not met properly. The way to solve these issues is to develop a fuzzy model for supplier assessment of bokar. The first step is the identification of criteria using FDM. Then developing a mathematical model. This research has been successfully developed a mathematical model where FAHP is used to determine the weight of supplier assessment criteria, combined with signed distance at the defuzzification stage. While FTOPSIS is used to obtain suppliers ranking. Through the survey using FDM, we obtain 6 main criteria and 18 subcriteria which relevant to the conditions of the crumb rubber industry in West Sumatera.
  Keywords
Supplier; fuzzy; Delphi; AHP; TOPSIS
  Click to Read the Full Text
PDF
  References

[1] S. Hendratno, “Analisis Perkembangan Pasar Karet Remah SIR,” Warta Perkaretan, vol. 34(2), pp. 161-176, 2015. https://doi.org/10.22302/ppk.wp.v34i2.257.

[2] N. Erni, M. S. Maarif, N. S. Indrasti, Machfud, dan S. Honggono, “Rekayasa Sistem Manajemen Ahli Perencanaan Produksi Karet Spesifikasi Teknis,” Jurnal Inovisi, vol. 7(1), pp. 25-32, 2011.

[3] Badan Pusat Statistik Propinsi Sumatera Barat. (15 Desember 2016). Berita Resmi Statistik BPS Provinsi Sumatera Barat No. 71/12/13/Th.XIX, diakses pada 12 Januari 2017, dari http://sumbar.bps.go.id/website/brs_ind/brsInd-20161215140219.pdf

[4] Elwizalina, “Penilaian Supplier Bokar pada PT Kilang Lima Gunung dengan Metoda Analytical Hierarchy Process,” Skripsi, Padang: Sekolah Tinggi Teknologi Industri Padang, 2008.

[5] I. B. Suryaningrat, “Raw Material Procurement on Agroindustrial Supply chain Management: a Case Survey of Fruit Processing Industries in Indonesia,” Agriculture and Agricultural Science Procedia, vol. 9, pp. 253-257, 2016. https://doi.org/10.1016/j.aaspro.2016.02.143.

[6] F. N. Lailia dan E. B. Santoso, “Penentuan Kawasan Agroindustri Berbasis Komoditas Unggulan Sektor Pertanian di Kabupaten Probolinggo,” Jurnal Teknik ITS, vol. 3(2), 2015.

[7] M. R. Syaffendi, “Analisis Posisi Karet Alam Indonesia di Pasar Karet Alam China,” Tesis, Bogor: Institut Pertanian Bogor, 2014.

[8] S. Maulina, N. M. N. Sulaiman, dan N. Z. Mahmood, “Enhancement of Eco-Efficiency through Life Cycle Assessment in Crumb Rubber Processing,” Procedia-Social and Behavioral Sciences, vol. 195(1), pp. 2475-2484, 2015. https://doi.org/10.1016/j.sbspro.2015.06.301.

[9] A.T. Noaman, B. H. A. Bakar, dan H. M. Akil, “The Effect of Combination Between Crumb Rubber and Steel Fiber on Impact Energy of Concrete Beams,” Procedia Engineering, vol. 125, pp. 825-831, 2003. https://doi.org/10.1016/j.proeng.2015.11.148.

[10] L. A. Rangkuti, A. J. M. Rambe, dan R. Ginting, “Peningkatan Kualitas Produk Crumb Rubber dengan Menggunakan Metode Quality Function Deployment,” e-Jurnal Teknik Industri FT USU, vol. 1(1), pp. 7-12, 2017.

[11] T. C. Tham, C. L. Hii, S. P. Ong, N. L. Chin, L. C. Abdullah, dan C. L. Law, “Technical Review on Crumb Rubber Drying Process and the Potensial of Advance Drying Technique,” Agriculture and Agricultural Science Procedia, vol. 2, pp. 26-32, 2014. https://doi.org/10.1016/j.aaspro.2014.11.005.

[12] W. Lan, W. Zhi-yang, dan H. Wen-bin, “Research on Interfacial Shear Characteristics of Crumb Rubber Modified Asphalt Concrete Bridge Deck Pavement Structure,” Procedia-Socialand Behavioral Science, vol. 96, pp. 1341-1349, 2013. https://doi.org/10.1016/j.sbspro.2013.08.152.

[13] F. N. Oktaviani, “Analisis Daya Saing Industri Karet Remah (Crumb Rubber) Indonesia,” Skripsi, Bogor: Institut Pertanian Bogor, 2011.

[14] S. Yosafat, “Studi Kelayakan Proyek Pendirian Pabrik Pengolahan Karet Crumb Rubber di Kalimantan Tengah,” Tesis, Surabaya: Institut Teknologi Surabaya, 2003.

[15] [15] M. B. Ayhan, “A Fuzzy Ahp Approach For Supplier Selection Problem: A Case Study In A Gearmotor Company,” International Journal of Managing Value and Supply Chains (IJMVSC), vol. 4(3), pp. 11-23, 2013. https://doi.org/10.5121/ijmvsc.2013.4302.

[16] [16] G. Ghiani, G. Laporte, dan R. Musmanno, Introduction to Logistics System Management. (Second Edition). United Kingdom: Jhon Wiley & Sons, Ltd., 2013. https://doi.org/10.1002/9781118492185.

[17] [17] Y. Y. Wibisono dan K. D. A. Gondo, “Pemilihan Pemasok dengan Metode Analytic Network Process (ANP): Studi Kasus di PT. AI,” Seminar Nasional IENACO. Hal 1-7, 2013.

[18] [18] D. Kurniawati, H. Yuliando, dan K. H. Widodo, “Kriteria Pemilihan Pemasok Menggunakan Analytical Hierarchy Process,” Jurnal Teknik Industri, vol. 15(1), pp. 25-32, 2013. https://doi.org/10.9744/jti.15.1.25-32.

[19] [19] J. Heizer dan B. Render, Manajemen Operasi: Manajemen Keberlangsungan dan Rantai Pasokan. Jakarta: Salemba Empat, 2015.

[20] [20] I. K. Gunadarta, Eriyatno, A. M. Fauzi, dan B. S. Kusmuljono, “Pengembangan Industri Crude Palm Oil Berkelanjutan dengan Menggunakan Model Geo-Spatial Multicriteria Decision Analysis,” Jurnal Bumi Lestari, vol. 13(1), pp. 16-26, 2013.

[21] [21] A. Amindoust, S. Ahmed, A. Saghafinia, dan A. Bahreininejad, “Sustainable supplier selection: A ranking model based on fuzzy inference system,” Elsevier Applied Soft Computing, vol. 12, pp. 1668–1677, 2012. https://doi.org/10.1016/j.asoc.2012.01.023.

[22] [22] F. Tahriri, M. Mousavi, S. H. Haghighi, dan S. Z. M. Dawal, “The Application of Fuzzy Delphi and Fuzzy Inference System in Supplier Rangking and Selection,” Journal of Industrial Engineering International, vol. 10(3), pp. 66, 2014. https://doi.org/10.1007/s40092-014-0066-6.

[23] [23] Y. L. Hsu, C. H. Lee, dan V. B. Kreng, “The Application of Fuzzy Delphi Method and Fuzzy AHP in Lubricant regenerative Technology Selection,” Expert System with Application, vol. 37, pp. 419-425, 2009. https://doi.org/10.1016/j.eswa.2009.05.068.

[24] [24] A. P. S. Lezama, J. C. Arroyo, dan C. A. Hernandez, “Applying the Fuzzy Delphi Method for determining socio-ecological factors that influence adherence to mammography screening in rural areas of Mexico,” Cad. Saude Publica, Rio de Janeiro, vol. 30(2), pp. 245-258, 2014. https://doi.org/10.1590/0102-311X00025113.

[25] [25] W. K. Liu, “Application of the Fuzzy Delphi Method and the Fuzzy Analytic Hierarchy Process for the Managerial Competence of Multinational Corporation Executives,” International Journal of Education, Bussiness, Management and Learning, vol. 3(4), pp. 313-317, 2013. https://doi.org/10.7763/IJEEEE.2013.V3.248.

[26] [26] W. Anggraeni, R. P. Kusumawardani, dan R. D. Ardianto, “Penerapan Fuzzy Analytical Hierarchy Process pada Sistem Penilaian Pegawai di Rumah Sakit Onkologi Surabaya,” Seminar Nasional Sistem Informasi Indonesia. 22 September 2014. Surabaya, 406-411, 2014.

[27] [27] T. G. A. F. Adnyana, G. K. Gandhiadi, dan D. P. A. Nilakusmawati, “Penerapan Metode Fuzzy AHP dalam Penentuan Sektor yang Berpengaruh Terhadap Perekonomian Provinsi Bali,” E-Jurnal Matematika, vol. 5(2), pp. 59-66, 2016. https://doi.org/10.24843/MTK.2016.v05.i02.p122.

[28] J. H. Cheng, C. M. Lee, dan C. H. Tang, “An Application of Fuzzy Delphi and Fuzzy AHP on Evaluating Wafer Supplier in Semiconductor Industry,” WSEAS Transaction on Information Science and Applications, vol. 6(5), pp. 756-767, 2009.

[28] [29] A. M. P. Chandrasiri, “Fuzzy Inventory Model without Shortages Using Signed Distance Method,” International Journal of Science and Research (IJSR), vol. 5(7), pp. 187-190, 2016. https://doi.org/10.21275/v5i7.ART2016144.

[29] [30] H-M. Lee dan L. Lin, “Applying Signed Distance Methode for Fuzzy Inventory without Backorder,” International Journal of Innovative Computing, Information and Control, vol. 7(6), pp. 3523-3531, 2011.

[30] [31] J. Chiang, J. S. Yao, dan H. M. Lee, “Fuzzy Inventory with Backorder Defuzzification by Signed Distance Method,” Journal of Information Science and Engineering, vol. 21, pp. 673-694, 2005.

[31] [32] R. A. Hadiguna, “Decision Support System of Performance Assessment for Sustainable Supply Chain Management,” International Journal of Green Computing, vol. 4(2), 24-37, 2013. https://doi.org/10.4018/jgc.2013070103.

[32] [33] S. Kusumadewi, S. Hartati, A. Harjoko, dan R. Wardoyo, Fuzzy Multi-Attribute Decision Making (Fuzzy MADM), Yogyakarta: Graha Ilmu, 2006.

[33] [34] O. Manoliadis, I. Tsolas, dan A. Nakou, “Sustainable Construction and Drivers of Change in Greece: A Delphi Study,” Journal of Construction Management and Economics, vol. 24, pp. 113-120, 2006. https://doi.org/10.1080/01446190500204804.

StatisticsArticle Metrics

This article has been read : 27 times
PDF file viewed/downloaded : 13 times

This article can be traced from





Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.