Evaluasi Proses Pelayanan Administrasi Kependudukan dengan Metode Lean Office
Main Article Content
Keywords
keyword1
Abstract
The problems occurred at the Pelalawan Population and Civil Registration Service are wasteful in the time of service for population administration. Therefore, this study aims to make improvements in reducing waste of service time and provide recommendations for managing the administrative service process, thus, it can be used as a reference in the process of improving government service organizations. The method used is the Define, Measure, Analyze, Improve, and Control (DMAIC) method, by removing unproductive process steps, which focus on measurements, and applying technology to improve the quality of the target towards Six-Sigma. The results obtained by following the DMAIC process are the smallest timeliness in providing services with a gap value=(-1,196), σ=1,62; the ease of the service procedure with the gap value=(-0,917), σ=1,76; the competence of the officers in the service with the gap value=(-0,897), σ=1,76; and written and electronic information resources that are needed by the gap value=(-0,876), σ=1,78. The study proposes improvements by creating digital document archive settings, conducting the performance measurements using VSM map, building the queue system, creating a flow of services, designing a one door services, and improving the quality of resources by training the officers.
References
[2] A. M. Muin, A. T. Ummu, and R. Djafar, “Analisis Akuntabilitas Pelayanan Publik di Dinas Kependudukan dan Catatan Sipil Kabupaten Luwu,” Gov. J. Ilmu Pemerintah., vol. 7, no. 1, pp. 1–14, 2014.
[3] S. Wasistiono, Kapita Selekta Manajemen Pemerintahan Daerah. Bandung: CV Fokusmedia, 2003.
[4] A.G. Subarsono, Analisis Kebijakan Publik. Yogyakarta: Pustaka Pelajar, 2008.
[5] Moenir, Manajemen Pelayanan Umum Di Indonesia. Jakarta: Bumi Aksara, 2008.
[6] V. Gaspesz, Total Quality Management untuk Praktisi Bisnis dan Industri. Bogor: Vinchristo Publication, 2011.
[7] Ratminto and A.S. Winarsih, Manajemen Pelayanan. Yogyakarta: Pustaka Pelajar, 2015
[8] Kotler and Keller, Marketing Management (13th.ed.). New Jersey: Prentice Hall, Inc., 2009.
[9] Hardiyansyah, Kualitas Pelayanan Publik: Konsep, Dimensi, Indikator, dan Implementasinya. Yogyakarta: Penerbit Gava Media, 2011.
[10] Womack, Jones, and Roos, The Machines the Changed the World. New York, NY: Free Press, 2007.
[11] H. McManus, Product Development Value Stream Analysis and Mapping Manual (PDVMS) – Alpha Draft, Lean Aerospace Initiative. Cambridge, MA: Massachusetts Institute of Technology, 2003.
[12] J.C. Chen and R.A. Cox, “Value stream management for lean office – a case study”, Am. J. Ind. Business Manag., vol. 2, no. 2, pp. 17-29, 2012, https://doi.org/10.4236/ajibm.2012.22004.
[13] S. Taj and L. Berro, “Application of constrained management and lean manufacturing in developing best practices for productivity improvement in an auto-assembly plant”, Int. J. Product. Perform. Manag., vol. 55 no. 3/4, pp. 332-345, 2006, https://doi.org/10.1108/17410400610653264.
[14] P. Solding and P. Gullander, “Concepts for simulation based value stream mapping,” in Proceedings of the 2009 Winter Simulation Conference, 2009, M. D. Rossetti, R. R. Hill, B. Johansson, A. Dunkin and R. G. Ingalls, eds., https://doi.org/10.1109/WSC.2009.5429185.
[15] S. Vinodh, K.R. Arvind, and M. Somanaathan, “Application of value stream mapping in an Indian camshaft manufacturing organization”, J. Manuf. Technol. Manag., vol. 21, no. 7, pp. 888-900, 2010, https://doi.org/10.1108/17410381011077973.
[16] A. Rohani, Pengeluaran Pembelajaran. Jakarta: PT Rineka Cipta, 2010.
[17] P.S. Pande, P.S. Neuman, and R. R. Cavanagh, The Sig Sigma Way, 5th ed. New York: McGraw-Hill, 2000.
[18] F. Tjiptono and G. Chandra. Service, Quality & Satisfaction. Yogyakarta: Andi Offset, 2005.
[19] McDermott, E. Robin, Mikulak, J. Raymond, Beauregard, and R. Michael. The Basics of FMEA (2nd ed.). New York: Productivity Press, 2009.
[20] D.H. Stamatis, Failure mode and effect analisis, FMEA from theory to execution. ASQ Quality Press, 2003.
[21] F.N. Kerlinger and H.B. Lee, Foundation of Behavioral Research (Fourth Edition). USA: Holt, Reinnar & Winton, Inc., 2000.
[22] D. Priyatno. Teknik Mudah dan Cepat Melakukan Analisis Data penelitian dengan SPSS dan Tanya Jawab Ujian Pendadaran. Yogyakarta: Gaya Media, 2010.
[23] Zulganef. Pemodelan Persamaan Struktur dan Aplikasi menggunakan AMOS 5. Bandung: Pustaka, 2006.
Article Sidebar
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Authors' Retention of Copyright
Authors retain the copyright of their original work published in Jurnal Optimasi Sistem Industri (JOSI). By submitting their manuscript to the journal, authors grant Jurnal Optimasi Sistem Industri (JOSI) a non-exclusive license to publish the work under the CC BY-NC-SA 4.0 International License. This means that others are permitted to:
- Share and adapt the work for non-commercial purposes, provided proper attribution is given to the original authors and source.
- Create derivative works based on the original article, as long as the new work is non-commercial and under the same CC BY-NC-SA 4.0 International License.
Non-Commercial Usage
The CC BY-NC-SA 4.0 International License restricts commercial use of the published work and its derivatives. Commercial use includes generating revenue, financial gain, or any form of commercial exploitation. This limitation aims to preserve the scholarly and educational nature of the content.
ShareAlike Requirement
If you remix, adapt, or build upon the work, you must distribute your contributions under the same CC BY-NC-SA 4.0 International License as the original work. This "ShareAlike" requirement ensures that any new works based on the original content adhere to the same non-commercial, share-alike principles.
Usage, Attribution, and Citations
Authors and readers are allowed to:
- Share and distribute the published article in any medium or format.
- Adapt, remix, transform, and build upon the article for non-commercial purposes.
- Provide appropriate attribution to the original authors and the journal.
When using content from Jurnal Optimasi Sistem Industri (JOSI), proper attribution must be provided through citation of the original source and authors.
Copyright Infringement and Ethical Considerations
If you believe that any material published in Jurnal Optimasi Sistem Industri (JOSI) infringes upon your copyright or the copyright of someone you represent, please contact the editorial team promptly. The journal is committed to addressing copyright concerns in accordance with established ethical guidelines set forth by the Committee on Publication Ethics (COPE).
For any questions or inquiries related to copyright and licensing, please contact the editorial team at editor_josi[at]eng.unand.ac.id.