Cost-Integrated Lean Maintenance to Reduce Maintenance Cost
Main Article Content
Keywords
Maintenance, Lean Maintenance, Waste, Process and Time Driven Activity Based Costing, PUGH
Abstract
The company has always prioritized cost reduction. In this study, the researchers aimed to decrease maintenance costs by actively eliminating expensive non-value-added processes. The study employed Process and Time Driven Activity Based Costing to integrate cost with the activities performed. By conducting maintenance value stream mapping, the researchers identified various forms of waste, such as centralized maintenance, ineffective data management, poor inventory management, inadequate maintenance, under-utilization of resources, and waiting time for maintenance resources. Several alternative improvement options were proposed, and the Pugh method was used to compare and select the most promising alternatives or combinations of alternatives. The third alternative, which involves conducting internal training and implementing standard operating procedures for maintenance technicians, supervisors, and machine operators, as well as integrating an IT system for maintenance and creating an equipment and spare parts inventory database, was chosen as the highest-ranking option. The results showed that this approach reduced processing time for administrative activities, lowered corrective maintenance costs, and improved maintenance efficiency for both preventive and corrective maintenance.
References
[2] T. Tinga, Principles of Loads and Failure Mechanisms: Applications in Maintenance, Reliability, and Design. in Springer Series in Reliability Engineering. London: Springer London, 2013. doi:10.1007/978-1-4471-4917-0.
[3] Ansori and Mustajib. "Integrated Treatment System. Yogyakarta: Science Graha. 2013.” Accessed: May 24, 2023. [Online]. Available: http://katalogdpkblora.perpusnas.go.id/detail-opac?id=16861
[4] Mostafa, S., Dumrak, J., and Soltan, H. "Lean Maintenance Roadmap. International Materials, Industrial, and Manufacturing Engineering Conference, 2015.” Accessed: May 24, 2023. [Online]. Available: https://www.researchgate.net/publication/283958209_Lean_Maintenance_Roadmap
[5] Kolanjiappan, S. "Innovative Approach in Introducing Lean Manufacturing Tools in Maintenance of Aircraft," Applied Mechanics Materials. 766–767. 2015.” Accessed: May 24, 2023. [Online]. Available: https://doi.org/10.4028/www.scientific.net/AMM.766-767.1190
[6] Duran, O, Capaldo, A and Acevedo, P. AD "Lean maintenance applied to improve maintenance efficiency in thermoelectric power plants". Energies 10, MDPI, Switzerland, 1–22. 2017.” Accessed: May 24, 2023. [Online]. Available: https://www.mdpi.com/1996-1073/10/10/1653
[7] N. L. Martin, A. Dér, C. Herrmann, and S. Thiede, “Assessment of Smart Manufacturing Solutions Based on Extended Value Stream Mapping,” Procedia CIRP, vol. 93, pp. 371–376, 2020, doi: 10.1016/j.procir.2020.04.019.
[8] T. Busert and A. Fay, “Extended Value Stream Mapping Method: Harmonizing Information Flows for the Control of Production Processes,” IFAC-Pap., vol. 52, no. 13, pp. 54–59, 2019, doi: 10.1016/j.ifacol.2019.11.129.
[9] W. D. P. Ferreira, F. Armellini, L. A. D. Santa-Eulalia, and V. Thomasset-Laperrière, “Extending the lean value stream mapping to the context of Industry 4.0: An agent-based technology approach,” J. Manuf. Syst., vol. 63, pp. 1–14, Apr. 2022, doi: 10.1016/j.jmsy.2022.02.002.
[10] P. Roh, A. Kunz, and K. Wegener, “Information stream mapping: Mapping, analysing and improving the efficiency of information streams in manufacturing value streams,” CIRP J. Manuf. Sci. Technol., vol. 25, pp. 1–13, May 2019, doi: 10.1016/j.cirpj.2019.04.004.
[11] T. Meudt, J. Metternich, and E. Abele, “Value stream mapping 4.0: Holistic examination of value stream and information logistics in production,” CIRP Ann., vol. 66, no. 1, pp. 413–416, 2017, doi: 10.1016/j.cirp.2017.04.005.
[12] D. Stadnicka and P. Litwin, “Value stream mapping and system dynamics integration for manufacturing line modelling and analysis,” Int. J. Prod. Econ., vol. 208, pp. 400–411, Feb. 2019, doi: 10.1016/j.ijpe.2018.12.011.
[13] L. Hartmann, T. Meudt, S. Seifermann, and J. Metternich, “Value stream method 4.0: holistic method to analyse and design value streams in the digital age,” Procedia CIRP, vol. 78, pp. 249–254, 2018, doi: 10.1016/j.procir.2018.08.309.
[14] D. A. Kurniawati and M. L. Muzaki, “Analisis Perawatan Mesin dengan Pendekatan RCM dan MVSM,” J. Optimasi Sist. Ind., vol. 16, no. 2, p. 89, Oct. 2017, doi: 10.25077/josi.v16.n2.p89-105.2017.
[15] Supriatna, A., Singgih, ML, Widodo, E., and Kurniati, N. "Overall Equipment Effectiveness Evaluation of Maintenance Strategies for Rented Equipment". International Journal of Technology, 619-630. 2020.” Accessed: May 24, 2023. [Online]. Available: https://ijtech.eng.ui.ac.id/article/view/3579
[16] M. L. Singgih et al., “Recent Development and Future Research of Manufacturing Excellence: A Literature Review,” 2021.
[17] S. W. Hia, M. L. Singgih, and R. O. S. Gurning, “Performance Metric Development to Measure Overall Vehicle Effectiveness in Mining Transportation,” Appl. Sci., vol. 12, no. 23, p. 12341, Dec. 2022, doi: 10.3390/app122312341.
[18] G. C. Squeo et al., “A comparative study using time-driven activity-based costing in single-fraction breast high-dose rate brachytherapy: An integrated brachytherapy suite vs. decentralized workflow,” Brachytherapy, vol. 21, no. 3, pp. 334–340, May 2022, doi: 10.1016/j.brachy.2021.12.006.
[19] Y. Ding, K. Chen, X. Wei, and Y. Yang, “A novel cost-management system for container terminals using a time-driven Activity-Based Costing approach,” Ocean Coast. Manag., vol. 217, p. 106011, Feb. 2022, doi: 10.1016/j.ocecoaman.2021.106011.
[20] G. S. Goh, R. M. Sutton, T. D’Amore, C. M. Baker, S. C. Clark, and P. M. Courtney, “A Time-Driven Activity-Based Costing Analysis of Simultaneous Versus Staged Bilateral Total Hip Arthroplasty and Total Knee Arthroplasty,” J. Arthroplasty, vol. 37, no. 8, pp. S742–S747, Aug. 2022, doi: 10.1016/j.arth.2022.01.048.
[21] D. S. Constantinescu, S. Haziza, D. J. Vanden Berge, C. A. McNamara, V. H. Hernandez, and M. R. D’Apuzzo, “Time-Driven Activity-Based Costing in Preoperative Tasks for Total Hip and Knee Arthroplasty,” J. Arthroplasty, vol. 37, no. 5, pp. 809–813, May 2022, doi: 10.1016/j.arth.2022.01.021.
[22] N. Defourny, S. Hoozée, J.-F. Daisne, and Y. Lievens, “Developing time-driven activity-based costing at the national level to support policy recommendations for radiation oncology in Belgium,” J. Account. Public Policy, vol. 42, no. 1, p. 107013, Jan. 2023, doi: 10.1016/j.jaccpubpol.2022.107013.
[23] Silverstein, D., Samuel, P., and Decarlo, N. (2011). "Pugh Matrix. In The Innovator’s ToolKit: 50 Techniques for Predictable and Sustainable Organic Growth (pp. 212-216).” Accessed: May 24, 2023. [Online]. Available: https://www.wiley.com/en-us/The+Innovator%27s+Toolkit%3A+50%2B+Techniques+for+Predictable+and+Sustainable+Organic+Growth%2C+2nd+Edition-p-9781118298107
[24] J. M. Nicholson and P. Collopy, “Pugh Controlled Convergence and Social Choice Theory,” Proc. Des. Soc. Int. Conf. Eng. Des., vol. 1, no. 1, pp. 1245–1254, Jul. 2019, doi: 10.1017/dsi.2019.130.
[25] S.-W. Kim and H. Jang, “Impact localization on a composite plate based on error outliers with Pugh’s concept selection,” Compos. Struct., vol. 200, pp. 449–465, Sep. 2018, doi: 10.1016/j.compstruct.2018.05.141.
[26] P. Wu, C. Hu, and Q.-H. Qin, “Time-dependent behavior of layered magneto-electro-elastic cylindrical shell with viscoelastic interlayer,” Compos. Struct., vol. 200, pp. 874–885, Sep. 2018, doi: 10.1016/j.compstruct.2018.05.115.
[27] D. D. Frey, P. M. Herder, Y. Wijnia, E. Subrahmanian, K. Katsikopoulos, and D. P. Clausing, “An Evaluation of the Pugh Controlled Convergence Method,” in Volume 3: 19th International Conference on Design Theory and Methodology; 1st International Conference on Micro- and Nanosystems; and 9th International Conference on Advanced Vehicle Tire Technologies, Parts A and B, Las Vegas, Nevada, USA: ASMEDC, Jan. 2007, pp. 193–203. doi: 10.1115/DETC2007-34758.
[28] H. Fan, A. P. Vassilopoulos, and T. Keller, “Numerical and analytical investigation of tensile behavior of non-laminated and laminated CFRP straps,” Compos. Struct., vol. 200, pp. 79–87, Sep. 2018, doi: 10.1016/j.compstruct.2018.05.055.
Article Sidebar
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Authors' Retention of Copyright
Authors retain the copyright of their original work published in Jurnal Optimasi Sistem Industri (JOSI). By submitting their manuscript to the journal, authors grant Jurnal Optimasi Sistem Industri (JOSI) a non-exclusive license to publish the work under the CC BY-NC-SA 4.0 International License. This means that others are permitted to:
- Share and adapt the work for non-commercial purposes, provided proper attribution is given to the original authors and source.
- Create derivative works based on the original article, as long as the new work is non-commercial and under the same CC BY-NC-SA 4.0 International License.
Non-Commercial Usage
The CC BY-NC-SA 4.0 International License restricts commercial use of the published work and its derivatives. Commercial use includes generating revenue, financial gain, or any form of commercial exploitation. This limitation aims to preserve the scholarly and educational nature of the content.
ShareAlike Requirement
If you remix, adapt, or build upon the work, you must distribute your contributions under the same CC BY-NC-SA 4.0 International License as the original work. This "ShareAlike" requirement ensures that any new works based on the original content adhere to the same non-commercial, share-alike principles.
Usage, Attribution, and Citations
Authors and readers are allowed to:
- Share and distribute the published article in any medium or format.
- Adapt, remix, transform, and build upon the article for non-commercial purposes.
- Provide appropriate attribution to the original authors and the journal.
When using content from Jurnal Optimasi Sistem Industri (JOSI), proper attribution must be provided through citation of the original source and authors.
Copyright Infringement and Ethical Considerations
If you believe that any material published in Jurnal Optimasi Sistem Industri (JOSI) infringes upon your copyright or the copyright of someone you represent, please contact the editorial team promptly. The journal is committed to addressing copyright concerns in accordance with established ethical guidelines set forth by the Committee on Publication Ethics (COPE).
For any questions or inquiries related to copyright and licensing, please contact the editorial team at editor_josi[at]eng.unand.ac.id.