Usulan Penerapan Total Productive Maintenance pada Mesin Turbin Gas

Irnanda Pratiwi

doi:10.25077/josi.v18.n1.p37-47.2019

Irnanda Pratiwi

Universitas Tridinanti

Keywords

Abstract

Overall Equipment Effectiveness (OEE) is one of the tools to enhance the effectiveness of the utilization rate of machinery and equipment in Total Productive Maintenance (TPM). TPM is a principle of management to improve productivity and efficiency of the production company to use the machine effectively. This study measures the value of OEE on gas turbine engine Centaur 50 C3344 which held on operation and maintenance section in PT Perta Samtan Gas Kilang Ekstraksi NGL Prabumulih in the period, followed by analyzing the value of using Pareto analysis of the results obtained by the root causes of the OEE. The conclusion that the value of the analysis results obtained on average exceeded the standard value of OEE 85.63% from 85%, even though in one period the value of OEE less than standard (22.63%). Factors that may experience rapid drop predicted loss is breakdown losses 382 hours (46.53%) and idling minor stoppages 373 hours (45.43), reduce speed 48 hours or 5.85%, rework losses 13 hours or 1.58%, and set up and adjustment losses 5 hours or 0.61%. As a result of which may not have an impact in a short time, but will immediately attack the machine if there is no treatment of maintenance as continuously and directly.

Downloads

Download data is not yet available.

References

[1] P. Gandhi, “Analisis Kualitatif Nilai Ekspor Migas Indonesia Dan Kepemilikan Blok Migas Oleh Perusahaan Asing Di Indonesia,” Jurnal Ekonomi Pertanian, Sumber Daya dan Lingkungan., vol. 1, pp. 87–101, Februari 2014.

[2] R. Ramdhani, R. Ratna, and G. Wibawa, “Desain Pabrik Ethylene dari Gas Alam di Teluk Bintuni Papua Barat,” Jurnal Teknik POMITS, vol. 4, pp. 1–3, Maret 2015.

[3] J. A. Setiawan, “Mencari Landasan Hukum Pembentukan Badan Penyangga (Aggregator) Gas,” Jurnal Hukum Novelty, vol. 7, pp. 237–250, Agustus 2016. https://doi.org/10.26555/novelty.v7i2.a5470.

[4] D. A. Nugroho, R. P. Setyawan, and G. Wibawa, “Cost Effective pada Sistem Regasifikasi Liquefied Natural Gas ( LNG ) di Indonesia,” Jurnal Teknik POMITS, vol. 3, pp. 42–46, Maret 2014.

[5] N. Fajrah and Noviardi, “Analisis Performansi Mesin Pre-Turning dengan Metode Overall Equipment Effectiveness pada PT APCB,” Jurnal Optimasi Sistem Industri, vol. 17, pp. 126–134, Oktober 2018. https://doi.org/10.25077/josi.v17.n2.p126-134.2018.

[6] D. A. Kurniawati and M. L. Muzaki, “Analisis Perawatan Mesin dengan Pendekatan RCM dan MVSM,” Jurnal Optimasi Sistem Industri, vol. 16, pp. 89–105, Oktober 2017. https://doi.org/10.25077/josi.v16.n2.p89-105.2017.

[7] M. F. Hazmi, A. I. Juniani, and E. N. Budiyanto, “Analisis Perhitungan OEE dan Six Big Losses terhadap Produktivitas Mesin Tuber Bottomer Line 4 PT.IKSG Tuban,” : Proc. of the 1st Conference on Safety and Its Application, Seminar K3 2017, Surabaya, Indonesia, September 2, 2017. Surabaya: Politeknik Perkapalan Negeri Surabaya, 2017. pp. 161–166.

[8] N. B. Santoso, “Pemanfaatan LNG Sebagai Sumber Energi di Indonesia,” Jurnal Rekayasa Proses, vol. 8, pp. 33–39, Juni 2014.

[9] N. Ansori and M. I. Mustajib, Sistem Perawatan Terpadu. Yogyakarta: Graha Ilmu, 2016.

[10] Project Description of NGL. Prabumulih: PT Perta Samtan Gas, 2011.

[11] M. W. Wakjira and A. P. Singh, “Total Productive Maintenance : A Case Study in Manufacturing Industry,” Global Journal Researches Engineering, vol. 12, pp. 25–32, Februari 2012.

[12] E. Y. T. Adesta, H. A. Prabowo, and D. Agusman, “Evaluating 8 pillars of Total Productive Maintenance ( TPM ) Implementation and Their Contribution to Manufacturing Performance,” : Proc. of the IOP Conference Series : Material Science and Engineering, ICAMME 2017, Kuala Lumpur, Malaysia, Agustus 8 - 9, 2017. UK : IOP Publishing,2017. pp. 1–8.

[13] M. N. Iftari, “Perbaikan Maintenance untuk Target Availability Penyaluran Gas dengan Pendekatan Total Productive Maintenance di PT PERTAMINA Gas Area Jawa Bagian Barat,” Jurnal MIX, vol. 6, pp. 234–245, Juli 2016.

[14] J. David, M. Méndez, and R. S. Rodriguez, “Total productive maintenance ( TPM ) as a tool for improving productivity : a case study of application in the bottleneck of an auto-parts machining line,” International Journal of Advanced Manufacturing Technology., vol. 92, pp. 1013–1026, September 2017. https://doi.org/10.1007/s00170-017-0052-4.

[15] H. A. Prabowo, Y. B. Suprapto, and F. Farida, “The Evaluation of Eight Pillars Total Productive Maintenance (TPM) Implementation and Their Impact on Overall Equipment Effectiveness (OEE) and Waste,” Jurnal Sinergi, vol. 22, pp. 13–18, Februari 2018. https://doi.org/10.22441/sinergi.2018.1.003.

[16] Sariyusda, Fakhriza, and J. Putra, “Analisa Efektivitas Produksi pada Unit Urea I dengan Menggunakan Metode Total Productive Maintenance (TPM) di PT Pupuk Iskandar Muda,” Jurnal Polimesin, vol. 14, pp. 37–43, Februari 2016. https://doi.org/10.30811/jpl.v14i1.300.

[17] H. M. Lazim, M. N. Salleh, C. Subramaniam, and S. N. Othman, “Total Productive Maintenance and Manufacturing Performance : Does Technical Complexity in the Production Process Matter ?,” International Journal of Trade, Economics and Finance, vol. 4, pp. 380–383, Desember 2013. https://doi.org/10.7763/IJTEF.2013.V4.321.

PDF

Published

May 16, 2019

https://doi.org/10.25077/josi.v18.n1.p37-47.2019

How to Cite

[1]

I. Pratiwi, “Usulan Penerapan Total Productive Maintenance pada Mesin Turbin Gas”, J. Optimasi Sist. Ind., vol. 18, no. 1, pp. 37–47, May 2019.

Issue

Vol. 18 No. 1 (2019): Published in May 2019

Section

Articles

Authors' Retention of Copyright

Authors retain the copyright of their original work published in Jurnal Optimasi Sistem Industri (JOSI). By submitting their manuscript to the journal, authors grant Jurnal Optimasi Sistem Industri (JOSI) a non-exclusive license to publish the work under the CC BY-NC-SA 4.0 International License. This means that others are permitted to:

Share and adapt the work for non-commercial purposes, provided proper attribution is given to the original authors and source.
Create derivative works based on the original article, as long as the new work is non-commercial and under the same CC BY-NC-SA 4.0 International License.

Non-Commercial Usage

The CC BY-NC-SA 4.0 International License restricts commercial use of the published work and its derivatives. Commercial use includes generating revenue, financial gain, or any form of commercial exploitation. This limitation aims to preserve the scholarly and educational nature of the content.

ShareAlike Requirement

If you remix, adapt, or build upon the work, you must distribute your contributions under the same CC BY-NC-SA 4.0 International License as the original work. This "ShareAlike" requirement ensures that any new works based on the original content adhere to the same non-commercial, share-alike principles.

Usage, Attribution, and Citations

Authors and readers are allowed to:

Share and distribute the published article in any medium or format.
Adapt, remix, transform, and build upon the article for non-commercial purposes.
Provide appropriate attribution to the original authors and the journal.

When using content from Jurnal Optimasi Sistem Industri (JOSI), proper attribution must be provided through citation of the original source and authors.

Copyright Infringement and Ethical Considerations

If you believe that any material published in Jurnal Optimasi Sistem Industri (JOSI) infringes upon your copyright or the copyright of someone you represent, please contact the editorial team promptly. The journal is committed to addressing copyright concerns in accordance with established ethical guidelines set forth by the Committee on Publication Ethics (COPE).

For any questions or inquiries related to copyright and licensing, please contact the editorial team at editor_josi[at]eng.unand.ac.id.