Pengembangan Algoritma Manajemen Risiko Proyek Konstruksi
Main Article Content
Keywords
Earned Value, House of Risk, Proyek Konstruksi, Algoritma
Abstract
The success of a project is uncertain. There is a possibility that the project was successful or failed. Some of the risks that may occur in the project include the arrival of goods or the completion of work late from the time set, design changes due to obstacles in the field, as well as other risks. It is therefore necessary to study the project risks to identify potential problems that may occur and make decisions to reduce risks and increase the likelihood of success of the project. In order for risk management to be performed, the owner must know the steps in evaluating the project and the steps in the implementation of risk management. This study discusses the development of algorithms for project evaluation and risk management. The resulting algorithm is then implemented to the CC-II civil construction project at Indarung VI Project. The results of the implementation show that the project is not running in accordance with the plan. The dominant factors causing delays include BOQ miscalculation by consultants, inadequate and slow decision-making mechanisms, and details of workmanship changes.
References
[2] Kemenperin, “Konsumsi Semen Naik Tipis,” 2016. [Online]. Available: www.kemenperin.go.id. [Accessed: 27-Nov-2016].
[3] Q. Cao and J. J. Hoffman, “A case study approach for developing a project performance evaluation system,” Int. J. Proj. Manag., vol. 29, pp. 155–164, 2011. https://doi.org/10.1016/j.ijproman.2010.02.010
[4] G. Bradley, A Guide to Risk Management. Quensland, Australia: Quensland Treasury, 2011.
[5] S. Y. Pujihastuti and M. Priyo, “Aplikasi Metode Nilai Hasil (Earned Value Method) pada Sistem Pengendalian Proyek,” J. Ilm. Semesta Tek., vol. 15, no. 2, pp. 159–161, 2012.
[6] D. K. Purwandono, “Aplikasi Model House of Risk (HoR) Untuk Mitigasi Risiko Proyek Pembangunan Jalan Tol Gempol-Pasuruan,” Institut Teknologi Sepuluh Nopember (ITS), 2010.
[7] M. B. Karim and P. D. Karningsih, “Perencanaan dan Pengendalian Proyek Konstruksi Menggunakan Critical Chain Project Management dan Lean Construction untuk Meminimasi Waste,” J. Tek. POMITS, vol. 1, pp. 1–5, 2012.
[8] A. Husen, Manajemen Proyek, Edisi Revisi . Yogyakarta: CV. Andi Offset, 2011.
[9] C. S. Snyder, A guide to the project management body of knowledge: PMBOK (®) guide. Newtown Square, PA, USA: Project Management Institute, 2014.
[10] D. Artika, “Penerapan Metode Lean Project Management Dalam Proyek Konstruksi Pada Pembangunan Gedung DPRD Kabupaten Ogan Ilir,” J. Tek. Sipil dan Lingkung., vol. 2, no. 1, pp. 171–179, 2015.
[11] R. F. Aziz and S. M. Hafez, “Applying lean thinking in construction and performance improvement,” Alexandria Eng. J., vol. 52, no. 4, pp. 679–695, 2013. https://doi.org/10.1016/j.aej.2013.04.008
[12] I. Fahmi, Manajemen Risiko: Teori. Kasus, dan Solusi. Bandung: Alfabreta, 2010.
[13] T. I. O. for S. (ISO), “ISO 31000: Risk Management–Principles and Guidelines,” Switzerland, 2009.
[14] Sarvina, “Project Evaluation Using Earned Value Analysis And Lean Project Management To Minimize Waste, Case Study: Indarung VI Project, PT Semen Padang,” Universitas Andalas, 2016.
[15] A. W. Nuruddin, S. Surachman, N. W. Setyanto, and R. Soenoko, “Implementasi Konsep Lean Manufacturing Untuk Meminimalkan Waktu Keterlambatan Penyelesaian Produk ”A” Sebagai Value Pelanggan (Studi Kasus PT. TSW (Tuban Steel Work),” Rekayasa Mesin, vol. 4, no. 2, pp. 147–156, 2013.
Article Sidebar
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Authors' Retention of Copyright
Authors retain the copyright of their original work published in Jurnal Optimasi Sistem Industri (JOSI). By submitting their manuscript to the journal, authors grant Jurnal Optimasi Sistem Industri (JOSI) a non-exclusive license to publish the work under the CC BY-NC-SA 4.0 International License. This means that others are permitted to:
- Share and adapt the work for non-commercial purposes, provided proper attribution is given to the original authors and source.
- Create derivative works based on the original article, as long as the new work is non-commercial and under the same CC BY-NC-SA 4.0 International License.
Non-Commercial Usage
The CC BY-NC-SA 4.0 International License restricts commercial use of the published work and its derivatives. Commercial use includes generating revenue, financial gain, or any form of commercial exploitation. This limitation aims to preserve the scholarly and educational nature of the content.
ShareAlike Requirement
If you remix, adapt, or build upon the work, you must distribute your contributions under the same CC BY-NC-SA 4.0 International License as the original work. This "ShareAlike" requirement ensures that any new works based on the original content adhere to the same non-commercial, share-alike principles.
Usage, Attribution, and Citations
Authors and readers are allowed to:
- Share and distribute the published article in any medium or format.
- Adapt, remix, transform, and build upon the article for non-commercial purposes.
- Provide appropriate attribution to the original authors and the journal.
When using content from Jurnal Optimasi Sistem Industri (JOSI), proper attribution must be provided through citation of the original source and authors.
Copyright Infringement and Ethical Considerations
If you believe that any material published in Jurnal Optimasi Sistem Industri (JOSI) infringes upon your copyright or the copyright of someone you represent, please contact the editorial team promptly. The journal is committed to addressing copyright concerns in accordance with established ethical guidelines set forth by the Committee on Publication Ethics (COPE).
For any questions or inquiries related to copyright and licensing, please contact the editorial team at editor_josi[at]eng.unand.ac.id.