Cloud Manufacturing: Tinjauan Literatur dan Pengembangan Layanannya untuk Perencanaan Fasilitas Produksi
Main Article Content
Keywords
Abstract
Cloud Manufacturing is an advanced manufacturing model which provides services by utilizing a shared resource pool such as computers, servers, networking, Internet and application softwares. The term Cloud Manufacturing in the engineering literature is still fairly new. it comes from the term Cloud Computing which is earlier known as Internet services on demand. Here includes Software as a Service (SaaS) along with infrastructure, platform and other delieveries as a service. First introduced by F. Tao in 2011, Cloud Manufacturing combines the latest technologies such as cloud computing, internet of thing, manufacturing object virtualizations and service-oriented computing services. The advanced manufacturing service models related to this terminology will be described as literatur reviews in this paper. At the end of this paper was given a case study of the application of the Cloud Manufacturing for designing a web-based production facilities layout as a cloud software as a service for the users.
Keywords: Cloud Manufacturing, layout, production facilities, web-based
Abstrak
Cloud Manufacturing dapat dikatakan sebagai sebuah model manufaktur yang berorientasikan pada penyediaan jasa dengan memanfaatkan sebuah resource pool yang dipakai secara bersama seperti komputer, server, jejaringan, internet dan perangkat lunak aplikasi. Istilah Cloud Manufacturing berasal dari istilah Cloud Computing yang lebih dahulu terkenal, sebagai suatu layanan perangkat lunak bagi pengguna (Software as a Service/ SaaS) dan perangkat keras yang memungkinkan penyediaan layanan tersebut. Istilah Cloud Manufacturing dalam berbagai literatur keteknikan terbilang masih baru. Pertama dicetuskan oleh F. Tao di tahun 2011, cloud manufacturing mengkombinasikan berbagai teknologi terkini seperti cloud computing, internet of thing, virtualisasi obyek manufaktur dan teknologi komputasi berorientasi pada pelayanan jasa. Perjalanan model manufaktur ini hingga literatur terakhir yang terkait akan dijelaskan pada tulisan ini. Pada bagian akhir dari tulisan ini diberikan sebuah gambaran studi kasus penerapan Cloud Manufacturing pada layanan untuk perencanaan fasilitas produksi berbasis Web, terutama untuk rancangan tataletak produksi, sebagai suatu layanan cloud perangkat lunak bagi pengguna.
Kata kunci: Cloud Manufacturing, tataletak, fasilitas produksi, berbasis Web
Keywords: Cloud Manufacturing, layout, production facilities, web-based
Abstrak
Cloud Manufacturing dapat dikatakan sebagai sebuah model manufaktur yang berorientasikan pada penyediaan jasa dengan memanfaatkan sebuah resource pool yang dipakai secara bersama seperti komputer, server, jejaringan, internet dan perangkat lunak aplikasi. Istilah Cloud Manufacturing berasal dari istilah Cloud Computing yang lebih dahulu terkenal, sebagai suatu layanan perangkat lunak bagi pengguna (Software as a Service/ SaaS) dan perangkat keras yang memungkinkan penyediaan layanan tersebut. Istilah Cloud Manufacturing dalam berbagai literatur keteknikan terbilang masih baru. Pertama dicetuskan oleh F. Tao di tahun 2011, cloud manufacturing mengkombinasikan berbagai teknologi terkini seperti cloud computing, internet of thing, virtualisasi obyek manufaktur dan teknologi komputasi berorientasi pada pelayanan jasa. Perjalanan model manufaktur ini hingga literatur terakhir yang terkait akan dijelaskan pada tulisan ini. Pada bagian akhir dari tulisan ini diberikan sebuah gambaran studi kasus penerapan Cloud Manufacturing pada layanan untuk perencanaan fasilitas produksi berbasis Web, terutama untuk rancangan tataletak produksi, sebagai suatu layanan cloud perangkat lunak bagi pengguna.
Kata kunci: Cloud Manufacturing, tataletak, fasilitas produksi, berbasis Web
Downloads
Download data is not yet available.
References
[1] B. Kamallakharan, 2014, The benefit of cloud computing. https:// www.greenqloud.com/the-benefits-of-cloud-computing/ (diakses 10 Oktober 2014).
[2] P. Mell dan T. Grance, “The NIST definition of cloud computing (draft)”. NIST Spec Publ 80:145, 2011.
[3] J. D. Prince, Introduction to Cloud Computing. Maryland , USA: University of Maryland, Baltimore, 2011.
[4] M. Armbrust, A. Fox, R. Griffith, A. D. Joseph, R. Katz, A. Konwinski, G. Lee, D. Patterson, A. Rabkin, I. Stoica, M. Zaharia, “A view of cloud computing”, Communications of the ACM 2010, Vol. 53 No. 4, Pages 50-58.
[5] D. Catteddu dan G. Hogben, Cloud computing: Benefits, risks and recommendations for information security, European Network and Information Security Agency (ENISA), 2009.
[6] E. I. Nehru, B. Venkatalakshmi, R. Balakrishnan, R. Nithya, “Neural Load Prediction Technique for Power Optimization in Cloud Management System”, Information & Communication Technologies (ICT), 2013 IEEE Conference on, pp. 541 – 544.
[7] I. Konstantinou, E. Angelou, C. Boumpouka, D. Tsoumakos dan N. Koziris, “On the Elasticity of Nosql Databases Over Cloud Management Platforms”, in Proceedings of the 20th ACM international conference on Information and knowledge management 2011, Glasgow, Scotland, UK, pp. 2385-2388.
[8] G. Suciu, O. Fratu, S. Halunga, C. G. Cernat, V. Poenaru, V. Suciu, “Cloud consulting: ERP and communication application integration in open source cloud systems”, Telecommunications Forum (TELFOR), 2011 19th, Belgrade, pp. 578-581.
[9] B. H. Li, L. Zang, “Cloud manufacturing: a new service-oriented networked manufacturing model”. Computer Integrated Manufacturing Systems, 2010.
[10] F Tao, L. Zhang, V. C. Venkatesh, Y. L. Luo, Y. Cheng, "Cloud manufacturing: a computing and service-oriented manufacturing model", Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, (Proc IMechE Part B: J.
Eng. Manufact.), 2011, 225 (10), pp. 1969-1976.
[11] X. Xu, "From Cloud Computing to Cloud Manufacturing", Robotics and Computer-Integrated Manufacturing. Vol. 28, Issue 1, pp. 75-86, 2012.
[12] D. Wu, J. L. Thames, D. W. Rosen and D. Schaefer, “Towards a Cloud-Based Design and Manufacturing Paradigm: Looking Backward, Looking Forward”, Proceedings of the ASME 2012 International Design Engineering Technical Conference & Computers and Information in Engineering Conference (IDETC/CIE12), Chicago, U.S, Paper Number: DETC2012-70780.
[13] D. Wu, D. W. Rosen, and D. Schaefer, Cloud-Based Design and Manufacturing: Status and Promise. In: D. Schaefer (Ed): Cloud-Based Design and Manufacturing: A Service-Oriented Product Development Paradigm for the 21st Century, London, UK: Springer, pp.1-24, 2014.
[14] D. Wu, M. J. Greer, D. W. Rosen and D. Schaefer, “Cloud Manufacturing: Strategic Vision and State-of-the-Art”, Journal of Manufacturing Systems, Vol. 32, No. 4, pp. 564-579, 2013.
[15] X. V. Wang, "Development of an Interoperable Cloud-based Manufacturing System", PhD thesis, Mechanical Engineering, University of Auckland, 2012.
[16] Y. Lu, X. Xu and J. Xu, "Development of a Hybrid Manufacturing Cloud". Journal of Manufacturing Systems, Vol. 33 No. 4, pp. 551-566, 2014.
[17] K. Hartig, 2008, “What is cloud computing? Cloud Computing Journal”. Diambil dari: http://cloudcomputing. syscon.com/node/579826 (diakses 10 Oktober 2014).
[18] E. Knorr, 2008, “What cloud computing really means”. InfoWorld”. Diambil dari: http:// www.infoworld. com/article/2683784/cloud-computing/ what-cloud-computing-really-means. html (diakses 10 Oktober 2014)
[19] C. Harris, “Go higher with cloud computing”, School Library Journal, Vol. 55, Issue 1, pp.14, 2009.
[20] M. E. Scale, “Assessing the Impact of Cloud Computing and Web Collaboration on the Work of Distance Library Services”, Journal of Library Administration, Vol. 50, Issue 7-8, pp.933-950, 2010.
[21] Alexander L., Factor, “Analyzing application service providers”, Beijing:
Publishing house of electronics industry, 2003.
[22] Y. Y. Yusuf, M. Sarhadi and A. Gunasekaran, “Agile manufacturing: The drivers, concepts, and attributes”, International Journal of Production Economics, Vol. 62, pp.33, 1999.
[23] Y. Fan, “Connotation and key technologies of networked manufacturing”, Computer Integrated Manufacturing Systems, Vol.9, pp. 576, 2003.
[24] F. Tao, Y. Hu and L. Zhang, “Theory and Practice: Optimal Resource Service Allocation inn Manufacturing Grid”, Beijing: China Machine Press, 2010.
[25] J. Höller, V. Tsiatsis, C. Mulligan, S. Karnouskos, S. Avesand and D. Boyle, “From Machine-to-Machine to the Internet of Things: Introduction to a New Age of Intelligence”. Elsevier, 2014.
[26] F. Tao, L. Zhang, V. C. Venkatesh, Y. Luo, and Y. Cheng, “Cloud manufacturing: a computing and service-oriented manufacturing model”. Proc. IMechE Vol. 225 Part B: J. Engineering Manufacture, pp. 1969-1976, 2011.
[27] L. Zhang, Y. L. Luo, F. Tao, B. H. Li, Y. K. Liu, X. S. Zhang, H. Guo, Y. Cheng and A. R. Hu, “Cloud Manufacturing: A New Manufacturing Paradigm”, Enterprise Information Systems, 2012.
[28] X. V. Wang and X. W. Xu, “ICMS: A Cloud-Based Manufacturing System”, Department of Mechanical Engineering, School of Engineering, University of Auckland, Auckland, New Zealand, 2013.
[29] E. Brown, 2011, “Final Version of NIST Cloud Computing Definition Published”, Diambil dari: http://www.nist.gov/itl/ csd/cloud-102511.cfm (diakses tanggal 10 Oktober 2014).
[30] T. Rostami, M. K. Akbari and M. S. Javan, “Benefits, Weaknesses, Opportunities and Risks of SaaS adoption from Iranian organizations perspective”, Taali University of Technology Computer Engineering and IT Department, Teheran, Iran, 2014.
[31] P. Gil, 2014, “What is SaaS (Software as a Service)”. Diambil dari: http://netforbeginners.about.com/od/s/f/what_is_SaaS_software_as_a_service.htm (diakses 10 oktober 2014).
[32] Z. Davis, 2014, “Definition of: SaaS". Diambil dari: PC Magazine Encyclopedia. http://www.pcmag.com/encyclopedia/te
rm/56112/saas (diakses 10 oktober 2014).
[33] N. N. 2014, “Cloud Computing for your your small business”. Diambil dari: http://www.hyphenet.com/blog/cloud-computing-for-your-small-business/ (diakses 10 oktober 2014)
[34] Cortona3D. http://www.cortona3d.com/ (diakses tanggal 30 Nov. 2014)
[35] BS Contact, http://www.bitmanage-ment.com/(diakses tanggal 30 Nov. 2014)
[36] A. Sutanto, “Suatu Metoda Perancangan Fasilitas Produksi Berbasis Teknologi Web Tiga Dimensi”, Proceeding SNTTM V 21-23 Nov. 2006, UI, Depok.
[37] N.N (2014). Cortona3D Viewer- Browser VRML, http://www.cortona3d.com/cortona3d-viewer-download (diakses tanggal 30 Nov. 2014)
[38] A. Sutanto, “Pengembangan Model Pustaka Obyek 3D berbasis XML untuk Perencanaan Tataletak Fasilitas Produksi dengan Media Internet”, Proceeding SNTTM X 2-3 Nov. 2011, Unibraw, Malang.
[2] P. Mell dan T. Grance, “The NIST definition of cloud computing (draft)”. NIST Spec Publ 80:145, 2011.
[3] J. D. Prince, Introduction to Cloud Computing. Maryland , USA: University of Maryland, Baltimore, 2011.
[4] M. Armbrust, A. Fox, R. Griffith, A. D. Joseph, R. Katz, A. Konwinski, G. Lee, D. Patterson, A. Rabkin, I. Stoica, M. Zaharia, “A view of cloud computing”, Communications of the ACM 2010, Vol. 53 No. 4, Pages 50-58.
[5] D. Catteddu dan G. Hogben, Cloud computing: Benefits, risks and recommendations for information security, European Network and Information Security Agency (ENISA), 2009.
[6] E. I. Nehru, B. Venkatalakshmi, R. Balakrishnan, R. Nithya, “Neural Load Prediction Technique for Power Optimization in Cloud Management System”, Information & Communication Technologies (ICT), 2013 IEEE Conference on, pp. 541 – 544.
[7] I. Konstantinou, E. Angelou, C. Boumpouka, D. Tsoumakos dan N. Koziris, “On the Elasticity of Nosql Databases Over Cloud Management Platforms”, in Proceedings of the 20th ACM international conference on Information and knowledge management 2011, Glasgow, Scotland, UK, pp. 2385-2388.
[8] G. Suciu, O. Fratu, S. Halunga, C. G. Cernat, V. Poenaru, V. Suciu, “Cloud consulting: ERP and communication application integration in open source cloud systems”, Telecommunications Forum (TELFOR), 2011 19th, Belgrade, pp. 578-581.
[9] B. H. Li, L. Zang, “Cloud manufacturing: a new service-oriented networked manufacturing model”. Computer Integrated Manufacturing Systems, 2010.
[10] F Tao, L. Zhang, V. C. Venkatesh, Y. L. Luo, Y. Cheng, "Cloud manufacturing: a computing and service-oriented manufacturing model", Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, (Proc IMechE Part B: J.
Eng. Manufact.), 2011, 225 (10), pp. 1969-1976.
[11] X. Xu, "From Cloud Computing to Cloud Manufacturing", Robotics and Computer-Integrated Manufacturing. Vol. 28, Issue 1, pp. 75-86, 2012.
[12] D. Wu, J. L. Thames, D. W. Rosen and D. Schaefer, “Towards a Cloud-Based Design and Manufacturing Paradigm: Looking Backward, Looking Forward”, Proceedings of the ASME 2012 International Design Engineering Technical Conference & Computers and Information in Engineering Conference (IDETC/CIE12), Chicago, U.S, Paper Number: DETC2012-70780.
[13] D. Wu, D. W. Rosen, and D. Schaefer, Cloud-Based Design and Manufacturing: Status and Promise. In: D. Schaefer (Ed): Cloud-Based Design and Manufacturing: A Service-Oriented Product Development Paradigm for the 21st Century, London, UK: Springer, pp.1-24, 2014.
[14] D. Wu, M. J. Greer, D. W. Rosen and D. Schaefer, “Cloud Manufacturing: Strategic Vision and State-of-the-Art”, Journal of Manufacturing Systems, Vol. 32, No. 4, pp. 564-579, 2013.
[15] X. V. Wang, "Development of an Interoperable Cloud-based Manufacturing System", PhD thesis, Mechanical Engineering, University of Auckland, 2012.
[16] Y. Lu, X. Xu and J. Xu, "Development of a Hybrid Manufacturing Cloud". Journal of Manufacturing Systems, Vol. 33 No. 4, pp. 551-566, 2014.
[17] K. Hartig, 2008, “What is cloud computing? Cloud Computing Journal”. Diambil dari: http://cloudcomputing. syscon.com/node/579826 (diakses 10 Oktober 2014).
[18] E. Knorr, 2008, “What cloud computing really means”. InfoWorld”. Diambil dari: http:// www.infoworld. com/article/2683784/cloud-computing/ what-cloud-computing-really-means. html (diakses 10 Oktober 2014)
[19] C. Harris, “Go higher with cloud computing”, School Library Journal, Vol. 55, Issue 1, pp.14, 2009.
[20] M. E. Scale, “Assessing the Impact of Cloud Computing and Web Collaboration on the Work of Distance Library Services”, Journal of Library Administration, Vol. 50, Issue 7-8, pp.933-950, 2010.
[21] Alexander L., Factor, “Analyzing application service providers”, Beijing:
Publishing house of electronics industry, 2003.
[22] Y. Y. Yusuf, M. Sarhadi and A. Gunasekaran, “Agile manufacturing: The drivers, concepts, and attributes”, International Journal of Production Economics, Vol. 62, pp.33, 1999.
[23] Y. Fan, “Connotation and key technologies of networked manufacturing”, Computer Integrated Manufacturing Systems, Vol.9, pp. 576, 2003.
[24] F. Tao, Y. Hu and L. Zhang, “Theory and Practice: Optimal Resource Service Allocation inn Manufacturing Grid”, Beijing: China Machine Press, 2010.
[25] J. Höller, V. Tsiatsis, C. Mulligan, S. Karnouskos, S. Avesand and D. Boyle, “From Machine-to-Machine to the Internet of Things: Introduction to a New Age of Intelligence”. Elsevier, 2014.
[26] F. Tao, L. Zhang, V. C. Venkatesh, Y. Luo, and Y. Cheng, “Cloud manufacturing: a computing and service-oriented manufacturing model”. Proc. IMechE Vol. 225 Part B: J. Engineering Manufacture, pp. 1969-1976, 2011.
[27] L. Zhang, Y. L. Luo, F. Tao, B. H. Li, Y. K. Liu, X. S. Zhang, H. Guo, Y. Cheng and A. R. Hu, “Cloud Manufacturing: A New Manufacturing Paradigm”, Enterprise Information Systems, 2012.
[28] X. V. Wang and X. W. Xu, “ICMS: A Cloud-Based Manufacturing System”, Department of Mechanical Engineering, School of Engineering, University of Auckland, Auckland, New Zealand, 2013.
[29] E. Brown, 2011, “Final Version of NIST Cloud Computing Definition Published”, Diambil dari: http://www.nist.gov/itl/ csd/cloud-102511.cfm (diakses tanggal 10 Oktober 2014).
[30] T. Rostami, M. K. Akbari and M. S. Javan, “Benefits, Weaknesses, Opportunities and Risks of SaaS adoption from Iranian organizations perspective”, Taali University of Technology Computer Engineering and IT Department, Teheran, Iran, 2014.
[31] P. Gil, 2014, “What is SaaS (Software as a Service)”. Diambil dari: http://netforbeginners.about.com/od/s/f/what_is_SaaS_software_as_a_service.htm (diakses 10 oktober 2014).
[32] Z. Davis, 2014, “Definition of: SaaS". Diambil dari: PC Magazine Encyclopedia. http://www.pcmag.com/encyclopedia/te
rm/56112/saas (diakses 10 oktober 2014).
[33] N. N. 2014, “Cloud Computing for your your small business”. Diambil dari: http://www.hyphenet.com/blog/cloud-computing-for-your-small-business/ (diakses 10 oktober 2014)
[34] Cortona3D. http://www.cortona3d.com/ (diakses tanggal 30 Nov. 2014)
[35] BS Contact, http://www.bitmanage-ment.com/(diakses tanggal 30 Nov. 2014)
[36] A. Sutanto, “Suatu Metoda Perancangan Fasilitas Produksi Berbasis Teknologi Web Tiga Dimensi”, Proceeding SNTTM V 21-23 Nov. 2006, UI, Depok.
[37] N.N (2014). Cortona3D Viewer- Browser VRML, http://www.cortona3d.com/cortona3d-viewer-download (diakses tanggal 30 Nov. 2014)
[38] A. Sutanto, “Pengembangan Model Pustaka Obyek 3D berbasis XML untuk Perencanaan Tataletak Fasilitas Produksi dengan Media Internet”, Proceeding SNTTM X 2-3 Nov. 2011, Unibraw, Malang.
Article Sidebar
Published
Apr 21, 2016
Article Details
How to Cite
[1]
A. Sutanto, “Cloud Manufacturing: Tinjauan Literatur dan Pengembangan Layanannya untuk Perencanaan Fasilitas Produksi”, J. Optimasi Sist. Ind., vol. 13, no. 2, pp. 725–742, Apr. 2016.
Section
Articles
Authors' Retention of Copyright
Authors retain the copyright of their original work published in Jurnal Optimasi Sistem Industri (JOSI). By submitting their manuscript to the journal, authors grant Jurnal Optimasi Sistem Industri (JOSI) a non-exclusive license to publish the work under the CC BY-NC-SA 4.0 International License. This means that others are permitted to:
- Share and adapt the work for non-commercial purposes, provided proper attribution is given to the original authors and source.
- Create derivative works based on the original article, as long as the new work is non-commercial and under the same CC BY-NC-SA 4.0 International License.
Non-Commercial Usage
The CC BY-NC-SA 4.0 International License restricts commercial use of the published work and its derivatives. Commercial use includes generating revenue, financial gain, or any form of commercial exploitation. This limitation aims to preserve the scholarly and educational nature of the content.
ShareAlike Requirement
If you remix, adapt, or build upon the work, you must distribute your contributions under the same CC BY-NC-SA 4.0 International License as the original work. This "ShareAlike" requirement ensures that any new works based on the original content adhere to the same non-commercial, share-alike principles.
Usage, Attribution, and Citations
Authors and readers are allowed to:
- Share and distribute the published article in any medium or format.
- Adapt, remix, transform, and build upon the article for non-commercial purposes.
- Provide appropriate attribution to the original authors and the journal.
When using content from Jurnal Optimasi Sistem Industri (JOSI), proper attribution must be provided through citation of the original source and authors.
Copyright Infringement and Ethical Considerations
If you believe that any material published in Jurnal Optimasi Sistem Industri (JOSI) infringes upon your copyright or the copyright of someone you represent, please contact the editorial team promptly. The journal is committed to addressing copyright concerns in accordance with established ethical guidelines set forth by the Committee on Publication Ethics (COPE).
For any questions or inquiries related to copyright and licensing, please contact the editorial team at editor_josi[at]eng.unand.ac.id.
