Pengendalian Kualitas Part Trim Rear Quarter Right APV Arena dengan Menggunakan Metode Six Sigma di PT. Suzuki Indomobil Motor

Fatimah Zahara

doi:10.25077/josi.v13.n1.p486-502.2014

Fatimah Zahara

Jurusan Teknik Industri, Fakultas Teknik, Universitas Andalas, Padang

Keywords

Abstract

Quality is an important aspect in enhancing the competitiveness of the product. Quality's role is to give satisfaction to the customer and be able to compete with similar products. During of the production process there is a chance that the products are not produced in established standards. Products that not suitable with the specifications is a defect that would cause harm to the company. Trim Rear Quarter Right is a component of the APV Arena car which is each production of Trim Rear Quarter Right there are at least one or more defective products. This of course would lead to losses for the company. The method used in this case study is the six sigma method because this method has been proven effective. Defect in Trim Rear Quarter Right caused by five factors that is negligence of the operator in set up the machine, the age of the machine , the quality of the materials, the application of the method is not maximized and noisy environments. The set up process of injection molding machine is the most influential in causing the defect product with RPN (Risk Priority Number) value is 256.
Keywords: Quality, Six Sigma,Trim Rear Quarter Right
Abstrak
Kualitas merupakan aspek penting dalam meningkatkan daya saing produk. Perannya adalah memberikan kepuasan kepada pelanggan dan mampu bersaing dengan produk sejenis.Trim Rear Quarter Right merupakan komponen dari mobil APV Arena yangsetiap produksi Trim Rear Quarter Right ini setidaknya terdapat satu atau lebih produk cacat. Hal ini tentunya akan menyebabkan kerugian bagi perusahaan. Metode yang digunakan dalam studi kasus ini yaitu metode six sigma karena metode ini sudah terbukti efektif. acat pada produk Trim Rear Quarter Right disebabkan oleh lima faktor yaitu: kelalaian operator dalam set up mesin , umur mesin, kualitas material, penerapan metode yang belum maksimal dan lingkungan yang berisik. Proses set up molding injection machine adalah proses paling berpengaruh dalam menyebabkan defect produk dengan nilai RPN (Risk Priority Number) sebesar 256.
Kata kunci: Kualitas,Six Sigma, Trim Rear Quarter Right

Downloads

Download data is not yet available.

References

[1] S. Assauri, Manajemen Operasi Dan Produksi, Jakarta: LP FE UI, 1998.
[2] V. Gasperz, Total Quality Management, Jakarta: PT. Gramedia Pustaka Utama, 2005.
[3] J. Heizer dan B. Render, Operations Management (Manajemen Operasi), Jakarta: Salemba Empat, 2006.
[4] W.M. Lindsay dan J.R. Evans, An Introduction to Six Sigma &Process
Improvement, Jakarta: Salemba Empat, 2007.
[5] D.C. Montgomery, Introduction to Statistical Quality Control 4th Edition. New York: John Wiley & Sons, Inc., 2001.
[6] M.N. Nasution, Manajemen Mutu Terpadu, Bogor: Ghalia Indonesia, 2005.
[7] S. Prawirosentono, Filosofi Baru Tentang Manajemen MutuTerpadu Abad 21: Kiat Membangun Bisnis Kompetitif, Jakarta: Bumi Aksara, 2007.
[8] S. Sinulingga, Pengantar Teknik Industri, Yogyakarta: Graha Ilmu, 2008.
[9] R.I. Wijaya, Analisis Proyek, Jakarta: FT UI, 2010.

PDF

Published

Apr 25, 2016

https://doi.org/10.25077/josi.v13.n1.p486-502.2014

How to Cite

[1]

F. Zahara, “Pengendalian Kualitas Part Trim Rear Quarter Right APV Arena dengan Menggunakan Metode Six Sigma di PT. Suzuki Indomobil Motor”, J. Optimasi Sist. Ind., vol. 13, no. 1, pp. 486–502, Apr. 2016.

Issue

Vol. 13 No. 1 (2014): Published in 1st April 2014

Section

Articles

Authors' Retention of Copyright

Authors retain the copyright of their original work published in Jurnal Optimasi Sistem Industri (JOSI). By submitting their manuscript to the journal, authors grant Jurnal Optimasi Sistem Industri (JOSI) a non-exclusive license to publish the work under the CC BY-NC-SA 4.0 International License. This means that others are permitted to:

Share and adapt the work for non-commercial purposes, provided proper attribution is given to the original authors and source.
Create derivative works based on the original article, as long as the new work is non-commercial and under the same CC BY-NC-SA 4.0 International License.

Non-Commercial Usage

The CC BY-NC-SA 4.0 International License restricts commercial use of the published work and its derivatives. Commercial use includes generating revenue, financial gain, or any form of commercial exploitation. This limitation aims to preserve the scholarly and educational nature of the content.

ShareAlike Requirement

If you remix, adapt, or build upon the work, you must distribute your contributions under the same CC BY-NC-SA 4.0 International License as the original work. This "ShareAlike" requirement ensures that any new works based on the original content adhere to the same non-commercial, share-alike principles.

Usage, Attribution, and Citations

Authors and readers are allowed to:

Share and distribute the published article in any medium or format.
Adapt, remix, transform, and build upon the article for non-commercial purposes.
Provide appropriate attribution to the original authors and the journal.

When using content from Jurnal Optimasi Sistem Industri (JOSI), proper attribution must be provided through citation of the original source and authors.

Copyright Infringement and Ethical Considerations

If you believe that any material published in Jurnal Optimasi Sistem Industri (JOSI) infringes upon your copyright or the copyright of someone you represent, please contact the editorial team promptly. The journal is committed to addressing copyright concerns in accordance with established ethical guidelines set forth by the Committee on Publication Ethics (COPE).

For any questions or inquiries related to copyright and licensing, please contact the editorial team at editor_josi[at]eng.unand.ac.id.